Telephone Operation
V^
Volume
Flash
Tone
Hold
Channel
Flash
Volume
Mute
Speaker
Tone
Options while on calls
To adjust volume
Press CIDV or ^DIR buttons on the handset or the VOLUME button on the base to adjust listening volume.
Call waiting
If you subscribe to a Call Waiting service with your local telephone service provider, you will hear a beep if someone calls while you are already on a call. Press PHONE/FLASH to put your current call on hold and take the new call.You can press PHONE/FLASH any- time to switch back and forth between calls.
Hold
Press HOLD to place a call on hold.
When a call is on hold, resume the conversation on the cordless handset by pressing HOLD or PHONE/FLASH. Resume a conversation at the base by lifting the handset or pressing SPEAKER or HOLD on the base.
When a call is on hold, you can replace either handset in its base or charger, and retrieve the call from another telephone.
SCANNING...
Mute
While using the base, you can press MUTE to silence the microphone during a conversation.You will be able to hear the caller, but your caller will not be able to hear you until you press MUTE again to resume speaking.
Channel (Cordless handset only)
If a call is noisy or unclear, or if words fade out, press MENU/CHAN on the cordless handset to scan for a better communication channel between the handset and base.
16