AT&T E5909B Day and time announcements, To set day and time, To check day and time, Press Clock

Page 41

16

1. Press CLOCK

The system will announce the cur- rent clock setting, then announces

"To set the clock, press CLOCK."

2. Press CLOCK

The system will announce the cur- rent day setting, then announces

"To change the day, press SKIP or REPEAT, to change the hour, press CLOCK."

3.	Press SKIP or
	REPEAT

until the system announces the cor- rect day, then press CLOCK.

4.	Press SKIP or
	REPEAT

until the system announces the cor- rect hour, then press CLOCK.

5.	Press SKIP or
	REPEAT

until the system announces the cor- rect minutes, then press CLOCK.

6.	Press SKIP or
	REPEAT

until the system announces the cor- rect year, then press CLOCK. The system announces the current clock setting.

Answering System Operation

Day and time announcements

To set day and time

Before playing each message, the answering system announces the day and time the message was received.

Before using the answering system, you should follow the steps at left to set the day and time, so messages are dated correctly. If the clock is not set, before playing messages, the system will prompt "Time and date not set" each time.

The system uses voice prompts to guide you. Each time you press SKIP orREPEAT , the day, hour, minute or year increases or decreases by one.When you hear the correct setting, press CLOCK to move to the next setting.

To check day and time

You can press CLOCK at any time to hear the current day and time without changing it.

NOTES:

1.You can press and hold SKIP or REPEAT to increase or decrease the minute or year by ten.

2.Caller ID provides the time and date. Set the year so that the day of the week can be calculated from the Caller ID information. After you set the time once, it will thereafter be set automatically with incoming Caller ID information. The time will be set automatically only if you subscribe to Caller ID service provided by your local telephone company (see page 5).

37

Image 41

Contents GHz Corded/Cordless Telephone/Answering System E5909B Need HELP? Information about Caller ID with Call Waiting See GHz Corded/Cordless Telephone/Answering System E5909B Table of contentsQuick reference guide Base Off, Low, High. see Ringer Volume Set switch on sideMenu Press to customize the telephone’s operation see Skip Press to skip message seeTelephone line cords 1 long, 1 short Charger power Adapters Parts checklistBase handset Handset cord Telephone base Belt clip CordlessTelephone operating range Before you beginAbout Caller Identification Plug the large Telephone base installationPower adapter Battery installation & charging Squeeze to open hinged wall mount Wall mountingLock in place Belt clip & optional headset Install belt clip as shown below if desiredChoose handset language Handset settingsSet handset date and time Set handset ringer tone Set handset ringer volumeChoose dial mode Base settingsChoose base ringer volume Choose base languageMaking and answering calls Basic cordless handset operationLast number redial Ring silencingRedial Basic base operationHandset locator Options while on calls Phone Hold INT Intercom Temporary tone dialingWay conference calls Call transfer Call transferIntercom calls Intercom callsHandling incoming calls INT Press INT/DELETE to page basePHONE/FLASH Intercom calls Directories handset and base DirectoriesSee Steps 4-7 on pages To create a Speed Dial entryTo call a Speed Dial number To create a directory entryTo edit or delete a Speed Dial number Directory dialingOptions while entering names Entering names into directoriesTo enter a name To enter a number Entering phone number and assigning distinctive ringOptions while entering numbers To assign a distinctive ring cordless handset onlyTo browse through the directory Directory searchTo search alphabetically To call a displayed numberTo make an entry a Speed Dial entry cordless handset only To copy, edit or delete an entryTo edit an entry To delete an entryCaller ID and Call Waiting Functions How Caller ID worksOn-Screen Message Reason Contrast Adjustment base onlyNot revealed at callers request To determine the callers nameReviewing the CID Memory CID memoryMemory Capacity Storing a record from the CID Memory into the directory Dialing from CID MemoryDeleting a number from the CID Memory Cordless handset Deleting all CID recordsBase Call waiting Press again to quit see Press to review or set clock see Message capacityTo set day and time Day and time announcementsTo check day and time Press ClockTo delete your outgoing announcement To play your outgoing announcementTo record your outgoing announcement Feature options Changing feature optionsAnnouncements Message playbackOptions during playback To delete all messagesTo record a memo Recording and playing memosTo play back a memo BeepMessage counter displays Remote access Screen display messages Display screen messages, lights and tonesAlert tones Indicator lightsMy telephone does not work at all TroubleshootingBatteries will not hold a charge Hear noise My cordless handset does not ring when I receive a call My Caller ID is CL flashes Important safety instructions Especially About Cordless Telephones Especially About Telephones Answering Systems Precautions for Users of Implanted Cardiac PacemakersFCC part 68 and Acta FCC part Limited warranty Limited warranty Please retain your receipt as your proof of purchase Index Technical specifications Fold card here Remote access wallet cardCut along dotted line