AT&T E5909B user manual Hear noise

Page 52

Appendix

Troubleshooting

I get noise, static, or weak signal even when I’m near the base.

•Other electronic products can cause interference to your cordless telephone. Try installing your telephone as far away from the follow- ing electronic devices as possible: wireless routers, radios, radio towers, pager towers, cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances and other cord- less telephones.

•Microwave ovens operate on the same frequency as your telephone. It is normal to experience static on your telephone while the micro- wave oven is operating. Do not install this telephone in the same out- let or near a microwave oven.

•If your telephone is plugged in with a modem or a surge protector, plug the telephone (or modem/surge protector) into a different loca- tion. If this solves the problem, re-locate your telephone or modem farther apart from one another, or use a different surge protector.

•Relocate your telephone to a higher location. It will likely have better reception when installed in a higher area.

•If the other telephones in your home are having the same problem, the problem is in your wiring or local service. Contact your local tele- phone company (charges may apply).

•If you subscribe to DSL service and if you hear noise during conver- sations and/or your caller ID features are not functioning properly, install a noise filter to the telephone line between the base unit and the telephone line jack. Contact your DSL provider to obtain a noise filter.

I hear other calls while using my telephone.

•Disconnect the telephone base unit from the telephone jack, and plug in a different telephone. If you still hear other calls, the problem is probably in your wiring or local service. Call your local telephone company.

I hear noise in	• Make sure the power cord is plugged in securely.
the cordless
handset, and
none of the
keys or buttons
work.

48

Image 52

Contents GHz Corded/Cordless Telephone/Answering System E5909B Need HELP? Information about Caller ID with Call Waiting See Table of contents GHz Corded/Cordless Telephone/Answering System E5909BQuick reference guide Ringer Volume Set switch on side Base Off, Low, High. seeMenu Press to customize the telephone’s operation see Skip Press to skip message seeParts checklist Telephone line cords 1 long, 1 short Charger power AdaptersBase handset Handset cord Telephone base Belt clip CordlessAbout Caller Identification Before you beginTelephone operating range Power adapter Telephone base installationPlug the large Battery installation & charging Lock in place Wall mountingSqueeze to open hinged wall mount Install belt clip as shown below if desired Belt clip & optional headsetHandset settings Choose handset languageSet handset date and time Set handset ringer volume Set handset ringer toneBase settings Choose dial modeChoose base ringer volume Choose base languageBasic cordless handset operation Making and answering callsLast number redial Ring silencingHandset locator Basic base operationRedial Options while on calls Way conference calls Temporary tone dialingPhone Hold INT Intercom Call transfer Call transferIntercom calls Intercom callsHandling incoming calls INT Press INT/DELETE to page basePHONE/FLASH Intercom calls Directories Directories handset and baseTo create a Speed Dial entry See Steps 4-7 on pagesTo create a directory entry To call a Speed Dial numberTo edit or delete a Speed Dial number Directory dialingTo enter a name Entering names into directoriesOptions while entering names Entering phone number and assigning distinctive ring To enter a numberOptions while entering numbers To assign a distinctive ring cordless handset onlyDirectory search To browse through the directoryTo search alphabetically To call a displayed numberTo copy, edit or delete an entry To make an entry a Speed Dial entry cordless handset onlyTo edit an entry To delete an entryHow Caller ID works Caller ID and Call Waiting FunctionsContrast Adjustment base only On-Screen Message ReasonNot revealed at callers request To determine the callers nameMemory Capacity CID memoryReviewing the CID Memory Dialing from CID Memory Storing a record from the CID Memory into the directoryDeleting a number from the CID Memory Base Deleting all CID recordsCordless handset Call waiting Message capacity Press again to quit see Press to review or set clock seeDay and time announcements To set day and timeTo check day and time Press ClockTo record your outgoing announcement To play your outgoing announcementTo delete your outgoing announcement Changing feature options Feature optionsMessage playback AnnouncementsOptions during playback To delete all messagesRecording and playing memos To record a memoTo play back a memo BeepMessage counter displays Remote access Display screen messages, lights and tones Screen display messagesIndicator lights Alert tonesTroubleshooting My telephone does not work at allBatteries will not hold a charge Hear noise My cordless handset does not ring when I receive a call My Caller ID is CL flashes Important safety instructions Especially About Cordless Telephones Precautions for Users of Implanted Cardiac Pacemakers Especially About Telephones Answering SystemsFCC part 68 and Acta FCC part Limited warranty Limited warranty Please retain your receipt as your proof of purchase Index Technical specifications Cut along dotted line Remote access wallet cardFold card here