Nikon UX5000 Installing And Using a Headset, To install an optional headset, To use your headset

Page 12

Installing And Using a Headset

To install an optional headset:

1.Plug the headset cord into the headset jack on the bottom of the terminal.

2.The headset cord routes through the upper channel on the right side of the terminal base.

To program a Headset Key:

1.CALL1 + Dial 851 + Press Function Key + Headset code 05 + SPK.

–You will hear a confirmation beep and see visual Headset confirmation on your display.

To use your headset:

Option: A Headset Service Code can be defined by your Communications Manager which will allow the headset mode to be automatically used for all calls.

1.Press your programmed Headset Function Key.

–The headset key lights when you’re on a call. To

disconnect, press the Headset key again. You can still use the handset for calls or respond to voice-announced Intercom calls with the headset plugged in. The headset only activates when the Headset key is pressed.

Answer a ringing call by pressing the Headset key.

OR

Press the Headset key and then a line key to make a trunk call.

OR

Press the Headset key to get Intercom dial tone.

OR

If on a headset call, press the Headset key to hang up.

Using the Headset with Automatic Answer for ACD Agents:

1.With the keyset in an idle state, press the CHECK key.

2.Press the programmed Headset Function Key (851:05) twice.

–Incoming CO calls to the agent will automatically be answered. Ringing Intercom calls will have to be answered manually.

3.Press the CLEAR key to return the display to idle.

–The Headset key blinks when Automatic Headset is activated.

12

– To cancel Automatic Headset, repeat these steps.

 

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Multibutton Terminal User Guide Installing the Handset And Line Cord Adjusting the Five-Position Viewing AngleRemoving and Reinstalling the Faceplate How To Use This GuideWhen using the instructions in this user guide, you Secure Mode, Display and Soft Keys Your Function KeysSetting Up Your Abbreviated Dial Bin Keys Using the Fixed Function KeysUnderstanding the Ring/Message Lamp Outside Calls To answer an outside callTo place an outside call To return a call in your Caller ID logIntercom Calls To And From Co-Workers Place a Call On Hold Transfer a Call To a Co-worker Set Up a Conference Telephone Meeting To set up a conference/meeting Forward reroute Your Calls ForwardDialing By Name Directory Dialing Change Your Ring TonesTo change your extension’s incoming ring tones To listen to the incoming ring choicesMessage Waiting MenuTo answer a Message Waiting left for you Off Hook Ring, Back Light and HeadsetInstalling And Using a Headset To install an optional headsetUsing the Headset with Automatic Answer for ACD Agents To program a Headset KeyUsing a DSS Console Special Features For AttendantsProgramming Your Extension’s Name To program your extension’s nameAdditional Quick Reference For Other Features To pick up CALL1 + ** + Announced extensionCalling Logging Into Your Mailbox To log into your mailbox from your own terminalTo log into your mailbox from a co-worker’s terminal Voice Mailbox Basics To record a greeting for your mailboxTo record a name for your mailbox To enter a security code for your mailboxMore Mailbox Features To record and send a message to a co-workerTo listen to your messages Push More+ Optns + ATime Push More+ Optns+ NotifVoice Mail Administrator Options To use the System Administrator optionsPush More+ Admin
Top Page Image Contents