Accessing the Management Interfaces (FastHub 400M Models)
Figure | Home Page |
Click Apply after making changes on a page. 
Click Revert 
to discard unapplied 
changes on
a page.
Click Help for procedures and detailed field descriptions.
Click the Mode 
button to change
the mode that the LEDs display for the fixed 10/100 ports.
HOME PORT GROUP IP SNMP CDP SYSTEM |
|
| Click these topics to move from page | ||
|
| ||||
|
|
| to page. On Netscape Communicator | ||
|
|
| only, when the cursor is above a topic, | ||
|
|
| a | ||
|
|
| on that particular page. | ||
|
|
|
|
| Click a port to display its |
|
|
|
|
| |
|
|
|
|
| settings, status, and statistics. |
|
|
|
|
|
|
Click to display the settings, status, and statistics of an installed 10BaseT/100BaseTX or 100BaseFX switched uplink module.
15529
Shows when another hub is connected to a stacking connector on the hub rear panel.
Note You can bookmark the hub IP address to retrieve the hub manager for later use. If you are using Communicator, choose the Communicator menu option, and select Bookmarks > Add Bookmark. If you are using Internet Explorer, choose the Favorites menu option, and select Add to Favorites. Do not use the right mouse button to bookmark the hub IP address; doing so only saves the specific frame (image) of the hub manager page.