Upgrading Polycom CX700 Phone within a Microsoft Office Communications Server 2007 R2 Environment
To prepare the software update files:
1.Download the Microsoft Office Communications Server (OCS) 2007 1.0.522.101 Polycom CX700 phone software release (UCUpdates.exe) here and store it on a Pool Front End server (for example, c:\UCUpdates\522.101).
2.Open a CMD window, change to the directory where you downloaded the 1.0.522.101 version of UCUpdates and run the ucupdates.exe file. Extract the CAB file to a directory (for example, use the same directory that ucupdates.exe is in).
3.From the Pool Front End server, click Start, Administrative Tools, Office Communications Server R2.
4.
.cab File.
5.Navigate to the directory where you extracted the CAB file (for example, c:\UCUpdates\522.101), click on UCUpdates and click Open.
This will extract the 3 CPE.* files from the CAB file and make them available for Approval / Rollback.
6.Click the Pending Updates tab and ensure that 1.0.522.101 is in the “Pending” state. Do not change it at this time.
7.Click the Test Devices tab and add the Polycom CX700 phone to be upgraded (no spaces / dashes in the MAC address).
Step 2.2 - Upgrade the Polycom CX700 Phone from 1.0.199.123 to 1.0.522.101
Now that the necessary CPE files have been installed and a test device created, it is time to upgrade the Polycom CX700 phone (test device) to release 1.0.522.101.
To upgrade the phone to release 1.0.522.101:
1.With the power off, connect the Polycom CX700 phone that you configured as a “Test Device” in the step 2.1 to the same network subnet as the Microsoft Office Communications Server 2007 R2 pool containing the Device Update service.
2.Perform a hard
When the scroll bar goes all the way across the screen, let go of the reset button and wait approximately 15 seconds for the white calibration screen.
3.Calibrate the phone by clicking the plus signs and then press the button in the center of the scroll wheel.
33