Uniden EXP 9100 specifications Installing the Battery Pack BT-9100

Page 11

4. Plug the AC Adapter cord into the AC Adapter input jack on the Base Unit.

(Note: Use only the AC Adapter supplied with the EXP 9100.) Place the cord inside the molded channel on the Wall Mount Adapter connected to the Base Unit.

5. Place the Base Unit onto the mounting screws and slide downward to secure. Then hang the Handset on the Base Unit.

5. Plug the other end of the Telephone Line Cord into the telephone wall jack.

7.Plug the AC Adapter into a standard 120V AC wall outlet.

8.Route the power cord where it will not create a trip hazard, or where it will not become chafed and create a fire or other electrical hazards.

Installing the Battery Pack (BT-9100)

1.Remove the battery compartment cover on the Handset by sliding it down.

2. Slide in the Nickel-Cadmium Battery Pack (Note: The Battery Pack is keyed to fit so the electrical contacts touch the Handset’s electrical contacts.)

3. Slide the battery compartment cover back on.

After removing the Battery Pack, the built-in Memory Backup feature allows up to 3 minutes to install a charged Battery Pack. This feature prevents losing any phone numbers that may be stored in the telephone’s memory.

11

Image 11

Contents Table of Contents Important Safety Instructions Page FCC Requirements About Your EXPUnpacking Automatic Digital Code Security EXP 9100 FeaturesSpread Spectrum Technology Auto Power ControlAuto Channel Scan and Auto Channel Change Connecting the Telephone Line Installing Your EXPSelecting the Installation Location Installing the Base Unit on a Desk or Tabletop Mounting the Base Unit on a Wall Installing the Wall-Mount Adapter on the Base UnitSetting the Handset Retainer Mounting Directly on a Wall Mounting on a Standard Wall PlateInstalling the Battery Pack BT-9100 Charging Extra Battery Packs Charging the Handset’s Battery PackCleaning the Battery Contacts Base Unit Battery Back-Up FeatureLow Battery Indicator Preparing the Base Unit and Handset Using Your EXPDialing a Stored Number Answering a CallMaking a Call Special Features Storing a One-Touch Dialing Number Using Your EXP 9100 MemoryStoring a Number PressPaging from the Base Unit Using your EXP 9100 IntercomStoring Mixed Tone/Pulse numbers Erasing a Stored NumberTo turn Room Monitoring on Using the EXP 9100 as a Room MonitorPaging the Base Unit While a Call is Holding Paging from the Handset to the Base UnitProblem Suggestion TroubleshootingRadio Interference Telephone Line ProblemsImportant Electrical Considerations RangeHandset SpecificationsBase Unit EXP Nickel-Cadmium Battery Disposal PrecautionsOne Year Limited Warranty ZUDUD01304AZ Base Unit Controls & Functions Handset Controls & Functions