Uniden EXP 9100 specifications Answering a Call, Making a Call, Dialing a Stored Number

Page 15

Answering a Call

1.The Handset rings and the green TALK LED and Keypad Lights flash.

2.If the Handset is not in the Base Unit, press TALK to answer the call.

3.If the Handset is in the Base Unit, the AutoTalk feature allows you to answer the call by simply picking up the Handset and beginning your conversation.

4.When you finish the call, place the Handset back on the Base Unit. AutoStandby automatically hangs up the phone. There is no need to press TALK to hang up.

—OR–

If the Handset is away from the Base Unit, press TALK to hang up the phone.

Making a Call

1.Remove the Handset from the Base Unit

2.Press TALK.

NOTE: The TALK LED flashes and there is a slight delay while the Spread Spectrum Technology in your EXP 9100 sets up a digital link between the Handset and the Base Unit.

3.When the TALK LED glows steadily and you hear a dial tone, dial the number you are calling by pressing the numbers on the keypad or using one of the memory features (See “Using Your EXP 9100 Memory.”)

4.When you finish the call, place the Handset back on the Base Unit.

AutoStandby automatically hangs up the phone. There is no need to press TALK to hang up.

—OR–

If the Handset is away from the Base Unit, press TALK to hang up the phone.

Dialing a Stored Number

1.Remove the Handset from the Base Unit

2.Press TALK.

3.Press MEMO and the memory number (01-20)for that number. -OR-

Press the ONE-TOUCH DIALING button for that number.

4.Your EXP 9100 will then dial the previously stored number. (To store a number, refer to “Using Your EXP 9100 Memory.”)

NOTE: If you select a memory location that does not have a stored number, the Handset will beep rapidly and the phone will not dial.

15

Image 15
Contents Table of Contents Important Safety Instructions Page About Your EXP UnpackingFCC Requirements Automatic Digital Code Security EXP 9100 FeaturesAuto Power Control Auto Channel Scan and Auto Channel ChangeSpread Spectrum Technology Installing Your EXP Selecting the Installation LocationConnecting the Telephone Line Installing the Base Unit on a Desk or Tabletop Installing the Wall-Mount Adapter on the Base Unit Setting the Handset RetainerMounting the Base Unit on a Wall Mounting Directly on a Wall Mounting on a Standard Wall PlateInstalling the Battery Pack BT-9100 Charging Extra Battery Packs Charging the Handset’s Battery PackBase Unit Battery Back-Up Feature Low Battery IndicatorCleaning the Battery Contacts Preparing the Base Unit and Handset Using Your EXPAnswering a Call Making a CallDialing a Stored Number Special Features Storing a One-Touch Dialing Number Using Your EXP 9100 MemoryStoring a Number PressPaging from the Base Unit Using your EXP 9100 IntercomStoring Mixed Tone/Pulse numbers Erasing a Stored NumberTo turn Room Monitoring on Using the EXP 9100 as a Room MonitorPaging the Base Unit While a Call is Holding Paging from the Handset to the Base UnitProblem Suggestion TroubleshootingRadio Interference Telephone Line ProblemsImportant Electrical Considerations RangeSpecifications Base UnitHandset EXP Nickel-Cadmium Battery Disposal PrecautionsOne Year Limited Warranty ZUDUD01304AZ Base Unit Controls & Functions Handset Controls & Functions