Uniden Using Your EXP 9100 Memory, Storing a Number, Press, Storing a One-Touch Dialing Number

Using Your EXP 9100 Memory

Storing a Number

1.Remove the Handset from the Base Unit

2.Press MEMO (The TALK LED lights and you hear a beep.)

3.Enter the number (up to 16 digits) you want to store.

You may enter a delay between numbers (for accessing a switchboard, or long distance service) by pressing RDL/P at the point in the number sequence you wish to pause. (Note: The RDL/P button counts as one digit.) Pressing RDL/P more than once will increase the length of the pause between numbers.

4.Press MEMO and a number (01-20)for the memory location.

After pressing MEMO the second time, you have 20 seconds to enter the number you wish to store. Otherwise, an error tone will sound and the unit returns to stand-by.

You will hear a confirmation beep and the TALK LED goes out.

5.Write the stored number and its memory location number on one of the enclosed stickers.

Example: Store 555-1234 in memory location 12:

a.Press MEMO

b.Press 5551234

c.Press MEMO

d.Press 12

The Handset beeps confirmation and the TALK LED goes out.

Storing a One-Touch Dialing Number:

1.Follow steps 1 - 3 above in “Storing a Number,” then:

2.Press MEMO and the ONE-TOUCH DIALING button (A, B, or C) you wish to program. The Handset beeps confirmation and the TALK LED goes out.

Example: Store 555-1234 in One-Touch button B:

a.Press MEMO

b.Press 5551234

c.Press MEMO

d.Press B

Handset beeps confirmation and the TALK LED goes out.

17