Uniden EXP 9100 specifications Specifications, Base Unit, Handset

Page 22

	Specifications
GENERAL	The EXP 9100 complies with FCC Part 15 and 68.
Frequency Control	: Crystal controlled transmission
Modulation	: MSK
Operating Temperature	: -10°to 50° C
Base Unit
Receive/Transmit Frequency	: 903.087 to 925.615 MHz (23 Channels)
Power Requirements	: 120V AC, 60 Hz
Size	: 63	in. W X 7	in. D X 3			5	in. H
Size	: 63	in. W X 7	in. D X 3				in. H
	4	8	32
	170mm W X 22mm D X 80mm H
Weight	: Approx. 1 lb., 5 oz. (590g)
Handset
Receive/Transmit Frequency	: 903.087 to 925.615 MHz (23 Channels)
Power Requirements	: Rechargeable Ni-Cd Battery Pack
Size	: 2 3	in. W x 2		3	in. D x 9 5 in. H with antenna
Size	: 2 3	in. W x 2	16		in. D x 9 5 in. H with antenna
	8		16				8
	60mm W X 55mm D X 245mm H with antenna
Weight	: Approx. 12 oz. (345g) with battery
Battery	: BT-9100

Specifications shown are typical and subject to change without notice.

Image 22

Contents Table of Contents Important Safety Instructions Page Unpacking About Your EXPFCC Requirements EXP 9100 Features Automatic Digital Code SecurityAuto Channel Scan and Auto Channel Change Auto Power ControlSpread Spectrum Technology Selecting the Installation Location Installing Your EXPConnecting the Telephone Line Installing the Base Unit on a Desk or Tabletop Setting the Handset Retainer Installing the Wall-Mount Adapter on the Base UnitMounting the Base Unit on a Wall Mounting on a Standard Wall Plate Mounting Directly on a WallInstalling the Battery Pack BT-9100 Charging the Handset’s Battery Pack Charging Extra Battery PacksLow Battery Indicator Base Unit Battery Back-Up FeatureCleaning the Battery Contacts Using Your EXP Preparing the Base Unit and HandsetMaking a Call Answering a CallDialing a Stored Number Special Features Press Using Your EXP 9100 MemoryStoring a Number Storing a One-Touch Dialing NumberErasing a Stored Number Using your EXP 9100 IntercomStoring Mixed Tone/Pulse numbers Paging from the Base Unit Paging from the Handset to the Base Unit Using the EXP 9100 as a Room Monitor Paging the Base Unit While a Call is Holding To turn Room Monitoring onTroubleshooting Problem SuggestionRange Telephone Line ProblemsImportant Electrical Considerations Radio InterferenceBase Unit SpecificationsHandset EXP Precautions Nickel-Cadmium Battery DisposalOne Year Limited Warranty ZUDUD01304AZ Base Unit Controls & Functions Handset Controls & Functions

Specifications