Uniden EXP 9100 specifications Installing the Base Unit on a Desk or Tabletop

Page 8

Installing the Base Unit on a Desk or Tabletop

NOTE: Refer to the foldout located in the back of this Operating Guide to help familiarize you with the controls of your cordless phone.

1.Place the Base Unit on

a desk or tabletop, and plug one end of the Telephone Line Cord (supplied) into the “LINE IN” jack on the Base.

2.Plug the other end of

the Telephone Line Cord into the telephone wall jack.

3.Plug the AC Adapter

cord into the AC Adapter input jack on the Base Unit.

(Note: Use only the AC Adapter supplied with the EXP 9100.)

4.Plug the AC Adapter into a standard 120V AC wall outlet.

5.Route the power cord where it will not create a trip hazard, or where it could become chafed and create a fire or other electrical hazards.

The unique design of your EXP 9100 allows you to place the Handset on the Base Unit either face down or in an upright position. Also, you may extend the legs on the bottom of the Base Unit, placing it at an angle for better visibility of the LEDs (See the Base Unit Fold-out illustration). Remove the Handset Support in the charging cradle so the handset remains in a stable, upright position. The Battery Pack in the Handset automatically recharges in either position.

8

Image 8

Contents Table of Contents Important Safety Instructions Page FCC Requirements About Your EXPUnpacking EXP 9100 Features Automatic Digital Code SecuritySpread Spectrum Technology Auto Power ControlAuto Channel Scan and Auto Channel Change Connecting the Telephone Line Installing Your EXPSelecting the Installation Location Installing the Base Unit on a Desk or Tabletop Mounting the Base Unit on a Wall Installing the Wall-Mount Adapter on the Base UnitSetting the Handset Retainer Mounting on a Standard Wall Plate Mounting Directly on a WallInstalling the Battery Pack BT-9100 Charging the Handset’s Battery Pack Charging Extra Battery PacksCleaning the Battery Contacts Base Unit Battery Back-Up FeatureLow Battery Indicator Using Your EXP Preparing the Base Unit and HandsetDialing a Stored Number Answering a CallMaking a Call Special Features Using Your EXP 9100 Memory Storing a NumberPress Storing a One-Touch Dialing NumberUsing your EXP 9100 Intercom Storing Mixed Tone/Pulse numbersErasing a Stored Number Paging from the Base UnitUsing the EXP 9100 as a Room Monitor Paging the Base Unit While a Call is HoldingPaging from the Handset to the Base Unit To turn Room Monitoring onTroubleshooting Problem SuggestionTelephone Line Problems Important Electrical ConsiderationsRange Radio InterferenceHandset SpecificationsBase Unit EXP Precautions Nickel-Cadmium Battery DisposalOne Year Limited Warranty ZUDUD01304AZ Base Unit Controls & Functions Handset Controls & Functions