Uniden Using the EXP 9100 as a Room Monitor, Paging the Base Unit While a Call is Holding

Page 19

Paging the Base Unit While a Call is Holding

1.Press INT’COM on the Handset. If no answer, press TALK or INT’COM to disconnect and return to the call ON HOLD.

2.At the Base Unit, press INT’COM to answer the page. Speak into the microphone.

3.To turn off the Intercom press INT’COM at the Base Unit

— OR —

Press TALK on the Handset. The Handset returns to the call ON HOLD.

Paging from the Handset to the Base Unit

1.Press INT’COM. on the Handset (If no answer, press INT’COM again to disconnect.)

2.At the Base Unit, press INT’COM to answer the page. Speak into the microphone.

3.To turn off the Intercom, press INT’COM at the Base Unit

OR —

Press TALK or INT’COM on the Handset.

Using the EXP 9100 as a Room Monitor

You may use the EXP 9100 Handset to monitor activity near the Base Unit without anyone present at the Base Unit.

To turn Room Monitoring on:

1.Remove the Handset from the Base Unit.

2.Press INT’COM on the Handset.

3.Press TALK on the Handset. Two-way communications are now set up between the Base Unit and the Handset.

NOTE: Press VOL/RVOL on the Handset to adjust the earpiece volume to loud or soft.

4.To change to one-way communication (Handset to Base only) for private listening, press MONITOR on the Handset.

NOTE: Press VOL/RVOL on the Handset to adjust the Monitor Speaker volume to loud or soft.

To turn monitoring off, press TALK at the Handset.

19

Image 19
Contents Table of Contents Important Safety Instructions Page Unpacking About Your EXPFCC Requirements Automatic Digital Code Security EXP 9100 FeaturesAuto Channel Scan and Auto Channel Change Auto Power ControlSpread Spectrum Technology Selecting the Installation Location Installing Your EXPConnecting the Telephone Line Installing the Base Unit on a Desk or Tabletop Setting the Handset Retainer Installing the Wall-Mount Adapter on the Base UnitMounting the Base Unit on a Wall Mounting Directly on a Wall Mounting on a Standard Wall PlateInstalling the Battery Pack BT-9100 Charging Extra Battery Packs Charging the Handset’s Battery PackLow Battery Indicator Base Unit Battery Back-Up FeatureCleaning the Battery Contacts Preparing the Base Unit and Handset Using Your EXPMaking a Call Answering a CallDialing a Stored Number Special Features Storing a One-Touch Dialing Number Using Your EXP 9100 MemoryStoring a Number PressPaging from the Base Unit Using your EXP 9100 IntercomStoring Mixed Tone/Pulse numbers Erasing a Stored NumberTo turn Room Monitoring on Using the EXP 9100 as a Room MonitorPaging the Base Unit While a Call is Holding Paging from the Handset to the Base UnitProblem Suggestion TroubleshootingRadio Interference Telephone Line ProblemsImportant Electrical Considerations RangeBase Unit SpecificationsHandset EXP Nickel-Cadmium Battery Disposal PrecautionsOne Year Limited Warranty ZUDUD01304AZ Base Unit Controls & Functions Handset Controls & Functions