Uniden EXP 9100 specifications Base Unit Battery Back-Up Feature, Low Battery Indicator

Page 13

Base Unit Battery Back-Up Feature

If AC power to the Base Unit fails, and the Spare Battery Charger contains a battery, the Base Unit will keep operating from the spare battery. This feature prevents the system from going dead during a power outage.

Low Battery Indicator

When the Battery Pack in the Handset is very low and needs to be charged, the TALK LED flashes every 3 seconds. If this occurs while you are on the phone, a short alert beep will also sound. When this happens:

1.Complete your call as quickly as possible. Once the battery is low, you will only be able to press the TALK button, returning the phone to Standby.

2.Return the Handset to the Base Unit for charging. Allow 5 to 7 hours without interruption for the Battery Pack to fully recharge. Or, replace the Handset’s Battery Pack with a charged Battery Pack.

Cleaning the Battery Contacts

CONTACTS

CONTACTS

To maintain a good charge, it is important to clean all charge contacts on the Handset and Base Unit about once a month. Use a pencil eraser or other contact cleaner. Do not use any liquids or solvents

13

Image 13

Contents Table of Contents Important Safety Instructions Page Unpacking About Your EXPFCC Requirements Automatic Digital Code Security EXP 9100 FeaturesAuto Channel Scan and Auto Channel Change Auto Power ControlSpread Spectrum Technology Selecting the Installation Location Installing Your EXPConnecting the Telephone Line Installing the Base Unit on a Desk or Tabletop Setting the Handset Retainer Installing the Wall-Mount Adapter on the Base UnitMounting the Base Unit on a Wall Mounting Directly on a Wall Mounting on a Standard Wall PlateInstalling the Battery Pack BT-9100 Charging Extra Battery Packs Charging the Handset’s Battery PackLow Battery Indicator Base Unit Battery Back-Up FeatureCleaning the Battery Contacts Preparing the Base Unit and Handset Using Your EXPMaking a Call Answering a CallDialing a Stored Number Special Features Storing a Number Using Your EXP 9100 MemoryPress Storing a One-Touch Dialing NumberStoring Mixed Tone/Pulse numbers Using your EXP 9100 IntercomErasing a Stored Number Paging from the Base UnitPaging the Base Unit While a Call is Holding Using the EXP 9100 as a Room MonitorPaging from the Handset to the Base Unit To turn Room Monitoring onProblem Suggestion TroubleshootingImportant Electrical Considerations Telephone Line ProblemsRange Radio InterferenceBase Unit SpecificationsHandset EXP Nickel-Cadmium Battery Disposal PrecautionsOne Year Limited Warranty ZUDUD01304AZ Base Unit Controls & Functions Handset Controls & Functions