EnGenius Technologies DURAWALKIE user manual Additional Base Station Features, Reset Button

Base Illustration

3.Reset Button

a. Restores base station to factory settings.

b.Reset button is indented to prevent accidental system reset.

c.All handsets (including administrator) and additional base(s) need to be re-registered after a base station reset.

4.Registration Key (REG)

Enters registration mode along with handset, assigns handset ID (10-99).

5.L1~L4

Standard RJ-11C/CA-11A connector to plug in the telephone line.

6.Audio-in Jack (3.5mm)

7.DC In: to plug in the power adaptor

Additional Base Station Features

1.4-channel Auto-Attendant

a.4 Auto-Attendant can be active at the same time in case of 4 simultaneous incoming calls.

b.Allows private paging to a single handset (with individual Handset ID) or group paging to a group of handsets (with Group ID).

c.Per line AA enable/disable by administrator.

When disabled for a line, the administrator can set all handsets to ring with an incoming call on that line, or a particular Handset/Group ID (either one; not simultaneously) can be assigned to have both incoming and outgoing call privileges on that line. See AA Configuration by Administrator.

d. Up to 128 seconds customizable main greeting message. e. Default of 4 lines AA is OFF.

22