Basic Operations
Operation Modes
Both the base station and handset have levels of operation at which time only certain procedures of functions can be performed.
Re: The main difference between DuraFon PRO and DuraWalkie is the handset of DuraFon PRO has the capability to make telephone calls, and the handset of DuraWalkie does not.
A. Base Operation Modes
1.IDLE mode- this is the default mode. The “Intercom”, “Broadcast”, and “Volume keys” are active in IDLE mode.
2.TALK mode- the base operates in this mode during a phone call, intercom use, and broadcast operation. The “In Use” , “Intercom”, and “Broadcast” LED will light up respectively.
3.REGISTRATION mode- the base enters this mode by pressing the REG button for three seconds. There are no active base unit keys once this mode has been entered. Four LEDs will light up in Registration mode.
B. Handset Operation Modes
1.IDLE mode- this is the default mode.
a.If there is no
b.The handset can be turned off completely by holding down the END key for 3 seconds.
c.The idle screen display (custom name) can be edited.
d.The
2.Menu mode
a.Press the (Right softkey) function key to activate MENU mode.
b.In MENU mode, the handset settings and information contained in memory can be changed.
c.The functions available through the MENU selection are covered in greater detail from page 53.
d.The MENU structure display as below:
30