Basic Operations
Making a Telephone Call (For DuraFon PRO only)
1.Press TALK , wait for dial tone, and then enter phone number.
2.Alternatively, you can enter phone number first then press TALK Key. When using this method, you can use the CLEAR (Left) and DELETE (Right softkeys) to edit the number entered. “Delete” erases the last digit entered. “Clear” erases the entire line but remains in the dialing mode.
3.Speed dial by access the entries in the phone book.
a.Press 
or 
scrolling key to enter the phone book.
b.Press TALK to dial the number.
4.To abort dialing, press END key.
5.During the call, press and hold the TALK Key to activate the speakerphone.
Notes:
1.After a link is established, the Base ID will appear on the upper- right corner.
If no Base ID shows up, it implies that you are approaching the boundary of the coverage.
2.If the line is occupied, the LCD shows “No Line Available” and handset returns to standby mode.
3.If a link cannot be established, the LCD will show “No Connection” after a
4.A call duration timer will start displaying the length of the call after link is established.
Making a 2-Way/ Intercom Call
The EnGenius Industrial Cordless Phone System offers private,
34