Advanced Operations
2.Caller ID service is required from your local phone company in order to receive phone numbers, names and time stamps on incoming calls. The Received and Missed Call Logs will register no incoming calls if Caller ID service is not available.
3.The Caller ID feature may not be supported by all PBX or Key systems’ analog ports, check with your equipment provider.
5.Press 4 to set
a.Press 1 to select ringer volume: Use
or 
to scroll through 6
options: Low, Medium, High, Vibrate, Vib and Ring, Off. Press SAVE (Left softkey) to save selection. Default = High.
b.Press 2 to select ringer tone: Use
or 
to scroll through 4
options: 0, 1, 2, and 3. Press SAVE (Left softkey) to save selection.
Default = 0.
c. Press 3 to select key volume when a key is pressed: Use 
or
to scroll through 3 options: High, Low, and Off. Press SAVE (Left softkey) to save selection. Default = Low.
d. Press 4 to select key tone: Use 
or 
to scroll through 4 options: 0, 1, 2, and 3. Press SAVE (Left softkey) to save selection. Default = 0.
6.Press 5 to change handset settings:
a.Press 1 to set dialing prefix:
i.Use 
or 
to scroll and select to turn on or off the dialing prefix feature. Default = Off.
ii.If “On” is selected, the handset is prompted to enter a prefix, up to 14 digits.
iii.Use DELETE (Right softkey) and 
or 
to edit prefix.
iv.When this feature is turned on, the LCD will prompt the user on each outgoing phone call except during redial or dialing by pressing the TALK key first whether to use the dialing prefix. The current prefix is also displayed. Press YES (Left softkey) or NO (Right softkey) to add the prefix to the beginning of the number.
v.This feature is useful for access code, calling card, and credit card calls, etc.
b.Press 2 to Group Select: see Handset Group Subscription.
c.Press 3 to set or turn Base Select on or off. Default = Off. See Base Select.
59