EnGenius Technologies DURAWALKIE user manual Press Menu 8

Getting Started

Re : when a call is coming in from L1, any handset can pick up the call, as long as the handset are in the coverage of base1~3.

1.Handset Registration.

a.Press REG button on Base “00” (default), four LEDs will light up in setting mode.

b.Handset operation: Press MENU61 (It will complete the registration process).

c.Repeat, as needed, to add handsets.

Note: Additional handsets should be added to the system before adding additional base units.

2.Establishing additional Base Units:

a.Press REG button on new Base.

b.Use Handset 10 or 11 to add base :

Press MENU81 .

c.Enter 01~07 (Base ID).

d.Repeat, as needed, to add base units.

Notes:

10

Select Mode 1.Add Base

10

Added Base Number: **

CANCEL

1.Only Handset 10, 11 can assign Base ID.

2.Base ”00” is a primary base. All handsets must register only on Base “00”.

*Expanding capacity: User capacity can be increased by adding additional base units. Up to 8 base units can be supported.

Legacy

PBX

1234 1234 1234

Base-1 Base-2 Base-3

28