Advanced Operations
Line Dedication
1.Line dedication function can be performed by administrator handsets (ID 10 and 11) only.
2.By default all incoming calls will ring all handsets .
3.With the administrative handset, press MENU 
9 
2 
2 for Line Dedication setting.
4.It will first show Line 1 and status. If you wish to dedicate line 1 to a
specific handset or group, you need to press OK . To dedicate lines
use 
or 
scrolling key on the keypad.
5.After choosing a line, it will show YES and NO , when choosing
YES , you need to enter the handset ID or group ID for extension number. If you choose NO , it will go back to Line setting menu.
Notes:
1.When entering Line Dedication setting, it will show line and status. If line is already dedicated to a specific handset or group, it will show the handset or group ID behind the line. If line isn't dedicated to a specific handset yet, it will show “ALL HS” behind the line.
2.When setting Line Dedication, make sure the handset or group ID is correct to avoid losing calls sents to an DuraWakie handset or
invalid ID.
3.Handsets dedicated to a port will also receive calls from non- dedicated line as well as the handset’s dedicated line. Use Line Dedication for a group on other lines to further manage calls.
Outbound Line Selection (For DuraFon PRO only)
1.Press MENU
5 
8 while the phone is in standby to enter Line Select menu.
2.Use 
or 
to switch between On and Off, default = Off.
3.If set to On, when pressing TALK or entering a phone number followed by pressing TALK Key, the handset LCD display will show “Select Line” followed by available lines (1~4). Select from one of the available lines i.e. press 1 to select line 1 and press 2 to select line 2.
4.This feature is also supported when selecting a second line during call conferencing.
50