
To program your
1.Lift the handset.
2.Press the PROG (program) button (See figure #17).
3.Using the keypad, dial the number you would like to save, including “1” and the area code (if applicable). (See figure #18.
4.Press one of the Priority or Memory Dial buttons (M1 – M8) located on top of the phone (See figure #19). Each button can be programmed (or reprogrammed using the same procedure) for a phone number.
5.The Caller ID Screen will display <<SAVE OK>> (See figure #20).
6.To register your stored phone numbers, use the phonebook insert card located under the base.
NOTE: Numbers will be lost if the phone is not receiving any power, either through the phone line, batteries, AC adapter during a storm, power outage or if you disconnect the phone. Entering a new number in the same location will automatically erase the previous number.
Figure #17 | Figure #18 | Figure #19 |
Program Button | Telephone Keypad | Memory / Priority Buttons |
Figure #20
LCD Display
NOTE: keypad is lighted for easier dialing.
If at any time you have questions about your telephone please contact our ClearSounds Customer Service Department at:
16