2.The screen will display “DIALED”, the last number dialed, the total of numbers, the date and the hour of record.
3. | Using the | or | arrow buttons, scroll through the numbers and select the |
| number you wish to dial. |
| |
4. | Lift the handset or press the SPKR button, the number will be automatically dialed. | ||
To delete one of telephone numbers, follow instructions below:
In the hook position,
1.Press the OK button.
2.The screen will display “DIALED”, the last number dialed, the total of numbers, the date and the hour of record.
3. Using the or 
arrow buttons, scroll through the numbers and select the number you wish to delete.
4.Press the C button.
5.The Screen will display “DEL?”
6.Press again the C button to confirm.
7.Press the OK button to exit.
AUTO ON HOOK
When the Auto On Hook feature is ON, Your ClearSounds CSC50 will automatically dis- connect the line after 5 - 8 minutes if the phone is left off the hook. This will restore your line to be able to receive another call even if you leave the handset off the base.
In the hook position, |
|
| |
1. | Press the MUTE button to access the Programming Menu. | ||
2. | Using the | or | arrow buttons, highlight <<SET PHONE>> then press the |
| OK button to confirm. |
| |
3. | Using the | or | arrow buttons, scroll to select <<AUTO ON HOOK>> and |
| press the OK button. |
| |
4.Using the arrow buttons, choose <<ON>> or <<OFF>>.
5.Press the OK button.
6.Press the C button twice to exit.
Troubleshooting Guide
No dial tone
1.Check that all phone cord connections (including the curly cord) and AC Adapter are securely plugged into the telephone & wall jack.
2.Check that the phone is in the correct dialing mode,
3.Plug another phone into the jack to make sure your phone service is functioning properly.
31