Panasonic KX-TG2650NZN For Best Performance, Battery Charge, Base Unit Location/Noise

Page 3

For Best Performance

Battery Charge

A rechargeable Nickel-Metal Hydride (Ni-MH) battery powers the handset. Charge the battery for about 8 hours before initial use (p. 11).

•Clean the handset and the base unit charge contacts with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust or high humidity. Otherwise the

battery may not charge properly.

Base Unit Location/Noise

The battery is beneath this cover.

Calls are transmitted between the base unit and the handset using wireless radio waves. For maximum distance and noise-free operation, the recommended base unit location is:

Away from electrical appliances				In a high and central location,
such as a TV, personal computer,				preferably where there are no
cellular phone, charging units or				obstructions.		�
another cordless phone.

Raise the antennas.

For best performance, extend the handset antenna fully.

•If the antenna is not fully extended, maximum	Extend until the
operating range will not be achieved.	antenna locks
	into position.

Note:

While using the handset:

•If you are near a microwave oven which is being used, noise may be heard from the receiver or the speaker. Move away from the microwave oven and closer to the base unit.

•If more than one cordless phone is being used and your handset is near another cordless phone’s base unit, noise may be heard. Move away from the other cordless phone’s base unit and closer to your base unit.

3

Image 3

Contents Operating Instructions Charge the battery for about 8 hours before initial useAccessories included Before Initial UseFor your future reference For best performance, extend the handset antenna fully Battery ChargeFor Best Performance Base Unit Location/NoiseContents Useful Information Transferring a Call Using the IntercomAntennas p Button and Indicator p , 23Location of Controls Base unitRinger Button p 21, 26 Edit Button p Exit Button p Recall Button p Clear Button p Caller ID Indicator pHeadset Jack Navigator KeyHandset Standby mode DisplaysBacklit LCD Displays Connections SettingsBattery strength Display prompt Battery strengthHigh Medium Low ﬂashing Needs to be recharged Operation Operating time Battery informationAfter your Panasonic battery is fully charged p RechargeSelecting the Line Mode During programming Programmable FunctionsPress Ö or Ñ to select On or Off Setting the Auto Talk FeatureSelecting the Ringer Volume Handset ringer volumeBase unit ringer volume With the Handset Making CallsHands-free Digital Duplex Speakerphone When the other party answers, talk intoPress MicrophoneTo redial after conﬁrming the last number dialled If noise interferes with the conversationTo redial the last number dialled on the handset To dial after conﬁrming the entered numberTalk into the MIC microphone When the other party answersWith the Base Unit Digital Duplex Speakerphone Dial a telephone numberTo release the hold To adjust the speaker volume 8 levels while talkingTo redial the last number dialled on the base unit To put a call on holdUseful information Simultaneous Keypad DiallingIf the handset is off the base unit Answering CallsWith the Base Unit Auto TalkFor New Zealand Users Caller ID ServiceHow caller information is displayed when a call is received Call group feature Dual-Colour Visual RingerPrivate name display To check the number of new callsWhile the handset is off the base unit With the base unit Using the Caller ListViewing the Caller List With the handsetPress # or What √ meansIf a caller calls more than once What → meansEditing the Caller’s Phone Number Calling Back from the Caller ListFree editing Press Edit to select a pattern Press Ö or Ñ repeatedly to ﬁnd the desired callerPress Ö or Ñ to select Save directory, and press á Yes key Storing Caller List Information in the DirectoryWith the handset/base unit Erasing Caller List InformationTo erase a speciﬁc caller from the Caller List To erase all entries in the Caller ListStoring a Phone Number in the Direct Button One-Touch DiallerPress or Dialling the Stored Number in the Direct ButtonUsing the Directory Storing Names and Numbers in the Directory While the arrow points to Save directory, press á Yes keyPress Ö Next key Enter a phone number, up to 22 digits Tom Jones =Edit H=Save If not required, select OffSelecting Characters to Enter Names If you make a mistake while entering a nameNumber of times key is pressed Keys Eight times For example, to enter Tom JonesFinding Items in the Directory With the handset/base unitTo search for a name by initial Keys Index Dialling from the DirectoryIndex table With the handset With the base unitEdit the phone number Editing an Item in the DirectoryErasing an Item from the Directory Intercom Paging the base unit from the handsetPaging the handset from the base unit Handset locator During an intercom call Transferring a Call Using the IntercomFrom the handset to the base unit From the base unit to the handsetFor Analog PBX Line/Long Distance Service Users Special FeaturesAutomatic Security Code Setting How to Use the Pause ButtonFor Call Waiting Service Users in New Zealand Call Waiting and Caller ID CompatibleFor Australia only Time is displayed, and press á Save key Recall ButtonSelecting the recall time Press Ö or Ñ repeatedly until the desiredTo switch to the speakerphone while using the headset Using the Belt ClipUsing an Optional Headset Connecting the headset to the handsetConnecting the headset to the base unit To adjust the headset receiver volume High, Medium or LowMaking/Answering calls Hours so that the battery strength indicator appears p Battery ReplacementWall template Install screws usingWall Mounting Wall TemplateShown To charge the handset batteryIf the Following Appear Handset displayBase unit display Before Requesting Help ProblemRemedyBefore Requesting Help Problem Remedy For New Zealand Customers For Australian CustomersAdding Another Phone Placement Safety InstructionsSafety Installations EnvironmentMedical For New Zealand Users Only Safety InstructionsInstallation Important Information For Australia onlyInstructions to customer PQQX13171ZA-BM SM0901SA0 Service difficulties