Panasonic KX-TG2650NZN, KX-TG2650ALN operating instructions Before Requesting Help, ProblemRemedy

Page 55

Before Requesting Help

ProblemRemedy

“No link to base.

Place on cradle and try again.” is displayed and an alarm tone sounds.

•You are too far from the base unit. Move closer and try again.

•Insert the handset in the cradle and try again.

•Plug in the AC adaptor.

•Extend the handset antenna fully.

•Raise the base unit antennas.

The unit does not work. •Check the settings (p. 10–13).

•Charge the battery fully (p. 11).

•Clean the charge contacts and charge again (p. 12).

•Install the battery properly (p. 51).

•Insert the handset in the cradle and unplug the AC adaptor to reset. Plug in, and try again.

•Re-install the battery and insert the handset in the cradle (p. 51). Try again.

•KX-TG2650ALN and KX-TG2650NZN are not designed to be used with rotary (pulse dialling) services.

Static, sound cuts in/out, fades. Interference from other electrical units.

•Locate the handset and the base unit away from other electrical appliances (p. 3).

•Move closer to the base unit.

•Extend the handset antenna fully.

•Raise the base unit antennas.

•Press (FUNCTION/CH) to select a clearer channel.

The handset and/or the base •The ringer volume is set to OFF. Set to

unit do not ring.	HIGH or LOW (p. 16).
The handset display is	•The handset is in the standby mode
blank.	(p. 9). Press Ö, Ñ, Ü or á to turn
	the display on.

The handset display is still •Charge the battery fully (p. 11). blank after pressing Ö, Ñ,

Üor á.

Useful Information

55

Image 55

Contents Operating Instructions Charge the battery for about 8 hours before initial useBefore Initial Use Accessories includedFor your future reference For best performance, extend the handset antenna fully Battery ChargeFor Best Performance Base Unit Location/NoiseContents Useful Information Transferring a Call Using the IntercomAntennas p Button and Indicator p , 23Location of Controls Base unitRinger Button p 21, 26 Edit Button p Exit Button p Recall Button p Clear Button p Caller ID Indicator pHeadset Jack Navigator KeyHandset Displays Standby modeBacklit LCD Displays Connections SettingsDisplay prompt Battery strength Battery strengthHigh Medium Low ﬂashing Needs to be recharged Operation Operating time Battery informationAfter your Panasonic battery is fully charged p RechargeSelecting the Line Mode During programming Programmable FunctionsPress Ö or Ñ to select On or Off Setting the Auto Talk FeatureHandset ringer volume Selecting the Ringer VolumeBase unit ringer volume With the Handset Making CallsHands-free Digital Duplex Speakerphone When the other party answers, talk intoPress MicrophoneTo redial after conﬁrming the last number dialled If noise interferes with the conversationTo redial the last number dialled on the handset To dial after conﬁrming the entered numberTalk into the MIC microphone When the other party answersWith the Base Unit Digital Duplex Speakerphone Dial a telephone numberTo release the hold To adjust the speaker volume 8 levels while talkingTo redial the last number dialled on the base unit To put a call on holdUseful information Simultaneous Keypad DiallingIf the handset is off the base unit Answering CallsWith the Base Unit Auto TalkFor New Zealand Users Caller ID ServiceHow caller information is displayed when a call is received Call group feature Dual-Colour Visual RingerTo check the number of new calls Private name displayWhile the handset is off the base unit With the base unit Using the Caller ListViewing the Caller List With the handsetPress # or What √ meansIf a caller calls more than once What → meansEditing the Caller’s Phone Number Calling Back from the Caller ListFree editing Press Edit to select a pattern Press Ö or Ñ repeatedly to ﬁnd the desired callerPress Ö or Ñ to select Save directory, and press á Yes key Storing Caller List Information in the DirectoryWith the handset/base unit Erasing Caller List InformationTo erase a speciﬁc caller from the Caller List To erase all entries in the Caller ListStoring a Phone Number in the Direct Button One-Touch DiallerPress or Dialling the Stored Number in the Direct ButtonUsing the Directory While the arrow points to Save directory, press á Yes key Storing Names and Numbers in the DirectoryPress Ö Next key Enter a phone number, up to 22 digits Tom Jones =Edit H=Save If not required, select OffIf you make a mistake while entering a name Selecting Characters to Enter NamesNumber of times key is pressed Keys Eight times For example, to enter Tom JonesWith the handset/base unit Finding Items in the DirectoryTo search for a name by initial Keys Index Dialling from the DirectoryIndex table With the handset With the base unitEdit the phone number Editing an Item in the DirectoryErasing an Item from the Directory Paging the base unit from the handset IntercomPaging the handset from the base unit Handset locator During an intercom call Transferring a Call Using the IntercomFrom the handset to the base unit From the base unit to the handsetFor Analog PBX Line/Long Distance Service Users Special FeaturesAutomatic Security Code Setting How to Use the Pause ButtonCall Waiting and Caller ID Compatible For Call Waiting Service Users in New ZealandFor Australia only Time is displayed, and press á Save key Recall ButtonSelecting the recall time Press Ö or Ñ repeatedly until the desiredTo switch to the speakerphone while using the headset Using the Belt ClipUsing an Optional Headset Connecting the headset to the handsetTo adjust the headset receiver volume High, Medium or Low Connecting the headset to the base unitMaking/Answering calls Hours so that the battery strength indicator appears p Battery ReplacementWall template Install screws usingWall Mounting Wall TemplateShown To charge the handset batteryHandset display If the Following AppearBase unit display Before Requesting Help ProblemRemedyBefore Requesting Help Problem Remedy For New Zealand Customers For Australian CustomersAdding Another Phone Placement Safety InstructionsSafety Installations EnvironmentMedical For New Zealand Users Only Safety InstructionsImportant Information For Australia only InstallationInstructions to customer PQQX13171ZA-BM SM0901SA0 Service difficulties