Panasonic KX-TG2650NZN, KX-TG2650ALN operating instructions Medical

Page 61

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO LIQUID OR ANY TYPE OF MOISTURE.

When a failure occurs which results in the internal parts becoming accessible, disconnect AC adaptor immediately and return this unit to the place of purchase or service centre.

If there is any trouble, disconnect the unit from the telephone line and connect a known working phone. If the known working phone operates properly, do not reconnect the unit to the telephone line until the fault has been repaired. If the known working phone does not operate properly, consult your telephone company.

This equipment has been tested and found to comply with AS/NZS 3548: 1995 limits for electromagnetic interference. Any modiﬁcations to any part of the system or to any peripherals may void the EMC compliance of the system or the peripherals.

This equipment will be inoperable when mains power fails.

The earcap on the handset is magnetised and may retain metallic objects.

Operating near 2.4GHz electrical appliances may cause interference. Move away from the electrical appliances and/or press the CH (Channel) button.

Medical

Consult the manufacturer of any personal medical devices, such as pacemakers, to determine if they are adequately shielded from external RF (radio frequency) energy. (The unit operates in the frequency range of 2401MHz to 2462MHz, and the power output level can range from 0.001 watts to 0.20 watts.) Do not use the unit in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to

external RF (radio frequency) energy.Useful Information

61

Image 61

Contents Operating Instructions Charge the battery for about 8 hours before initial useBefore Initial Use Accessories includedFor your future reference For Best Performance Battery ChargeBase Unit Location/Noise For best performance, extend the handset antenna fullyContents Useful Information Transferring a Call Using the IntercomLocation of Controls Button and Indicator p , 23Base unit Antennas pHeadset Jack Recall Button p Clear Button p Caller ID Indicator pNavigator Key Ringer Button p 21, 26 Edit Button p Exit Button pHandset Displays Standby modeBacklit LCD Displays Connections SettingsDisplay prompt Battery strength Battery strengthHigh Medium Low ﬂashing Needs to be recharged After your Panasonic battery is fully charged p Battery informationRecharge Operation Operating timeSelecting the Line Mode During programming Programmable FunctionsPress Ö or Ñ to select On or Off Setting the Auto Talk FeatureHandset ringer volume Selecting the Ringer VolumeBase unit ringer volume With the Handset Making CallsPress When the other party answers, talk intoMicrophone Hands-free Digital Duplex SpeakerphoneTo redial the last number dialled on the handset If noise interferes with the conversationTo dial after conﬁrming the entered number To redial after conﬁrming the last number dialledWith the Base Unit Digital Duplex Speakerphone When the other party answersDial a telephone number Talk into the MIC microphoneTo redial the last number dialled on the base unit To adjust the speaker volume 8 levels while talkingTo put a call on hold To release the holdUseful information Simultaneous Keypad DiallingWith the Base Unit Answering CallsAuto Talk If the handset is off the base unitHow caller information is displayed when a call is received Caller ID ServiceCall group feature Dual-Colour Visual Ringer For New Zealand UsersTo check the number of new calls Private name displayWhile the handset is off the base unit Viewing the Caller List Using the Caller ListWith the handset With the base unitIf a caller calls more than once What √ meansWhat → means Press # orEditing the Caller’s Phone Number Calling Back from the Caller ListFree editing Press Edit to select a pattern Press Ö or Ñ repeatedly to ﬁnd the desired callerPress Ö or Ñ to select Save directory, and press á Yes key Storing Caller List Information in the DirectoryTo erase a speciﬁc caller from the Caller List Erasing Caller List InformationTo erase all entries in the Caller List With the handset/base unitStoring a Phone Number in the Direct Button One-Touch DiallerPress or Dialling the Stored Number in the Direct ButtonUsing the Directory While the arrow points to Save directory, press á Yes key Storing Names and Numbers in the DirectoryPress Ö Next key Enter a phone number, up to 22 digits Tom Jones =Edit H=Save If not required, select OffIf you make a mistake while entering a name Selecting Characters to Enter NamesNumber of times key is pressed Keys Eight times For example, to enter Tom JonesWith the handset/base unit Finding Items in the DirectoryTo search for a name by initial Index table Dialling from the DirectoryWith the handset With the base unit Keys IndexEdit the phone number Editing an Item in the DirectoryErasing an Item from the Directory Paging the base unit from the handset IntercomPaging the handset from the base unit Handset locator From the handset to the base unit Transferring a Call Using the IntercomFrom the base unit to the handset During an intercom callAutomatic Security Code Setting Special FeaturesHow to Use the Pause Button For Analog PBX Line/Long Distance Service UsersCall Waiting and Caller ID Compatible For Call Waiting Service Users in New ZealandFor Australia only Selecting the recall time Recall ButtonPress Ö or Ñ repeatedly until the desired Time is displayed, and press á Save keyUsing an Optional Headset Using the Belt ClipConnecting the headset to the handset To switch to the speakerphone while using the headsetTo adjust the headset receiver volume High, Medium or Low Connecting the headset to the base unitMaking/Answering calls Hours so that the battery strength indicator appears p Battery ReplacementWall Mounting Install screws usingWall Template Wall templateShown To charge the handset batteryHandset display If the Following AppearBase unit display Before Requesting Help ProblemRemedyBefore Requesting Help Problem Remedy For New Zealand Customers For Australian CustomersAdding Another Phone Safety Safety InstructionsInstallations Environment PlacementMedical For New Zealand Users Only Safety InstructionsImportant Information For Australia only InstallationInstructions to customer PQQX13171ZA-BM SM0901SA0 Service difficulties