Making calls
Using the handset
1Dial the phone number.
eTo correct a digit, press [Clear].
2Press [_%] or [Call].
3When you finish talking, press [OFF] or place the handset on the base unit or charger.
Note:
•"Line in use" is displayed when someone is talking on the unit or another phone.
Using the speakerphone
1Dial the phone number, and press
•Speak alternately with the other party.
2When you finish talking, press
[OFF].
Note:
•Use the speakerphone in a quiet environment.
•To switch to the receiver, press [_%].
Adjusting the receiver/speaker volume
Press [A] or Iv] repeatedly while talking.
Making a call using the redial list The last 5 phone numbers dialed are stored in the redial list (each 48 digits max.).
1[REDIAL]
2[v]/[A]: Select the desired phone
number.
3["%]
Making/Answering Calls
Erasing a number in the redial list
1[REDIAL]
2[v]/[A]: Select the desired phone
number.
3 [Erase] _ [Yes] _ [OFF]
PAUSE button (for PBX/Iong distance service users)
A pause is sometimes required when making calls using a PBX or long distance service. When storing a calling card access number and/or PIN in the
phonebook, a pause is also needed (page 21).
For example, if you need to dial the line access number "9" when making outside calls with a PBX:
1 [9] --_ [PAUSE] _ Dial the
phone number.
2["_]
Note:
•A 3.5 second pause is inserted each time [PAUSE] is pressed. Press repeatedly to insert longer pauses.
For assistance, please visit http://www.panasonic.com!hetp | 15 |