Answering System
Listening to messages
using the handset
When new messages have been recorded:
-The message indicator on the handset flashes slowly if the message alert feature is turned on (page 35).
1[MENU]
2[v]/[A]: "Message play"_
[Select]
•The handset plays new messages including memo messages.
•When you have no new messages, the handset plays back all messages.
3 When finished, press [OFF].
Note:
• To switch to the receiver, press [_'_].
Voice guidance
If you do not press any buttons after the last message is played back, the handset's voice guidance starts. Operate the answering system by following the guidance as necessary.
Calling back (Caller ID subscribers only)
If Caller ID information was received for the call, you can call the caller back while listening to the message.
1 Press [Select] during playback.
•To edit the number before calling back, press [Edit] repeatedly to select the desired format (page 23).
2 [Cart]
Operating the answering system
You can also operate the answering system by pressing dial keys on the handset during playback.
[A]or Iv] Adjust the receiver/ speaker volume
[1]or [4] Repeat message (during playback) .1
[2]or [_] Skip message (during playback)
[4]Play new messages
[5]Play all messages
[8]Turn answering system
on
[9]Stop playback .2
[0]Turn answering system off
[Erase] currently playing
"1 If pressed within the first 5 seconds of a message, the previous message is played.
*2 To resume operation, press a command key within 15 seconds, or the voice guidance will start.
32For assistance, please visit http://www.panasonic.com!hetp