5Connect the tele )hone line cord. Mount the unit by inserting the mounting pins into the round openings on the adaptor (for pin I_, use round cut out at the bottom of the adaptor if you are using the 4 inches phone plate), then sliding the unit down to secure it.
Connect the AC adaptor to power outlet (page 9).
•There are two common types of wail phone plates. The distance between _ and I_) may vary depending on the size of the wall phone plate installed.
Useful Information
To remove the wall mounting adaptor While pushing down the release levers (O), remove the adaptor (_)).
AC adapt | Charger |
| |
| Available model: |
| |
| 1 Drive the screws (not included) into |
| the wall. |
| 25.4 mm |
_83rnf_
2 Mount the charger (O), then slide it
down (1_1)and to the right (O) until it is secure.
...........] .........
...... ......
For assistance, please visit http://www.panasonic.com!hetp | 41 |