Answering System
Remote commands
You can press diaI keys to access certain answering system functions without waiting for the voice guidance to prompt you.
[1]Repeat message (during playback) .1
[2]Skip message (during playback)
[41Play new messages
[51Play all messages
[91Stop playback .2
Start voice guidance .3
[01Turn answering system off
"! If pressed within the first 5 seconds of a message, the previous message is played.
*2 For English voice guidance only
•To resume operation, enter a remote command within 15
seconds, or the voice guidance starts.
*3 For Spanish voice guidance only
Turning on the answering system remotely
If the answering system is off, you can turn it on remotely.
1Dial your phone number.
2Let the phone ring 15 times.
•The unit answers your call with the greeting message.
•You can hang up, or if you call from a touch tone phone, you can enter
your remote code and begin remote operation (page 33).
Skipping the greeting message to leave a message
You can leave a message just as any outside caller can. Call your phone number. When the answering system picks up, press
Answering system
settings
Remote code
A remote code must be entered when operating the answering system remotely. This code prevents unauthorized parties from listening to your messages remotely. The default setting is "11".
1 [MENU 1 _ [01161131
2Enter the desired
Ring count
You can change the number of times the phone rings before the unit answers caIIs.
The default setting is "4".
"Toll saver": The unit answers on the 2nd ring when new messages have been recorded, and on the 4th ring when there are no new messages. If you call your phone from outside to listen to new messages (page 33), you will know that there are no new messages when the phone rings for the
34For assistance, please visit http://www.panasonic.com!hetp