Panasonic KX-TG6071, KX-TG6073, KX-TG6074, KX-TG6072 operating instructions Deregistering a handset

To establish a conference call:

Press [Conf].

•To leave the conference, press [OFF]. The other parties can continue the conversation.

•To put the outside call on hold, press [HOLD]. To resume the conference, press [Conf].

1During an outside call, press

[LOCATOR/INTERCOM] to put the call on hold.

2To page a specific handset, enter its extension number ([11 - [41).

To page all handsets, press [0] or wait for a few seconds.

3Wait for the paged party to answer.

•If the paged party does not answer,

press [LOCATOR/INTERCOM] to return to the outside call.

4To complete the transfer: Press [SP-PHONE].

•The outside call is being routed to the handset.

To establish a conference call: Press [CONF].

•To leave the conference, press [SP-PHONE]. The other parties can continue the conversation.

•To put the outside call on hold, press [HOLD]. To resume the conference, press [CONF].

Answering transferred calls

Press ["_] to answer the page.

Press [SP-PHONE]to answer the page.

Multi-unit Operation

Note for handset and base unit:

•After the paging party disconnects, you can talk to the outside caller.

Registering a handset

The included handset and base unit are preregistered. If for some reason the handset is not registered to the base unit, register the handset.

1Handset:

[MENU] _ [0][0][1]

2Base unit:

Press and hold [LOCATOR/

INTERCOM] until the IN USE indicator flashes.

•After the IN USE indicator starts flashing, the rest of the procedure

must be completed within 1 minute.

3Handset:

Press [OK], then wait until a beep sounds.

4[OFF]

Registering an additional handset

See page 5 for information on the available model.

Start from step 2.

Deregistering a handset

1 [MENU] _ [0][0][2]

2 [3][3][5] _ [OK]

3Select the handset you want to cancel by pressing the desired handset number ([11 - [41).

For assistance, please visit http://www.panasonic.com!hetp 39