Panasonic KX-TG6502, KX-TG6500 operating instructions FCC RF Exposure Warning

Page 102

FCC and Other Information

Some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. If interference is experienced, move the cordless telephone further away from the TV or VCR. This will often reduce, or eliminate, interference.

Operating near 5.8 GHz electrical appliances may cause interference. Move away from the electrical appliances.

FCC RF Exposure Warning:

This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply with FCC RF exposure requirements the base unit must be installed and operated with its antenna located 20 cm or more between antenna and all person’s body (excluding extremities of hands, wrist and feet). The handset unit may be carried and operated with only the specific provided belt-clip. Other non-tested belt-clips or similar body-worn accessories may not comply and must be avoided. The base and handset units must not be co-located or operated in conjunction with any other antenna or transmitter.

This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section 68.316.

When you hold the phone to your ear, noise might be heard in your Hearing Aid. Some Hearing Aids are not adequately shielded from external RF (radio frequency) energy. If noise occurs, use an optional headset accessory or the speakerphone option (if applicable) when using this phone. Consult your audiologist or Hearing Aid manufacturer about the availability of Hearing Aids which provide adequate shielding to RF energy commonly emitted by digital devices.

A TIA/EIA-IS-968 compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack that is also TIA/EIA-IS-968 compliant.

•Environment — do not place the unit in a room where the temperature is less than 5°C (41°F) or greater than 40°C (104°F). Allow 10 cm (4”) clearance around the unit for proper ventilation. Avoid excessive smoke, dust, mechanical vibration, shock, or direct sunlight.

•Medical — consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy. (The unit operates in the frequency range of 5760MHz to 5840MHz, and the power output level can range from 0.25 watts to 0.5 watts.) Do not use the unit in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF (radio frequency) energy.

•Routine care — wipe the unit with a soft cloth. Do not use benzine, thinner, or any abrasive powder. When you leave the unit unused for a long period of time, unplug the AC adaptor from the outlet.

•If there is any trouble — disconnect the unit from the telephone line and connect a known working phone. If the known working phone operates properly, have your unit repaired by one of the authorized Panasonic Factory Service Centers. If the known working phone does not operate properly, consult your telephone company.

102

Page 101 Page 103
Image 102
Page 101 Page 103
Contents Model No. KX-TG6500 Charge the battery for 6 hours before initial useGHz Expandable Cordless Phone System Pulse-or-tone dialing capabilityAccessories included Attach your purchase receipt hereCopyright Expanding Your Phone For KX-TG6500 usersFor KX-TG6502 users Contents Contents Battery charge For Best PerformanceBase unit location/Noise Location of Controls Base unitCharger unit KX-TG6502 only Location of ControlsHandset FLASH/CALL Wait Button pHandset navigator key How to use the soft keys/navigator keysHandset soft keys Base unit navigator keyDisplays 23 4Displays Installation Connecting the AC AdaptorInstallation Connecting the Telephone Line Cord To connect to a 2-line telephone jackWith Green Plugs If you use the unit as a single-line telephone only InstallationTo connect to 2 single-line telephone jacks Transparent PlugsNConnecting 2 single-line telephone jacks For DSL service usersNConnecting a 2-line telephone jack Ex. DSL line is LineBattery strength Installation Installing the Battery in the HandsetBattery Charge To replace the batteryRecharge Battery informationBattery replacement Operation Operating timeProgrammable Settings How to select a function item from the menuProgramming Guidelines Handset Programmable Settings Function Menu Table Handset Select AM or PM by pressing Press the soft key Save Programmable Settings Date and Time HandsetFor Caller ID service users p Press OFFEnglish Programmable Settings Display Language HandsetDialing Mode Handset ToneProgrammable Settings Line Mode Handset Line1BLow Programmable Settings Auto Talk HandsetOff LCD Contrast HandsetProgrammable Settings Ringer Volume Handset ringer volume HandsetTemporary ringer off Programmable SettingsSelecting the base unit ringer volume by using the Handset To turn the ringer on, press d or B in stepHandset ringer tone Handset Programmable Settings Ringer Tone1Tone Scroll to Ringer tone by pressing d orSelecting the base unit ringer tone by using the Handset Press H or G repeatedly to select the desired toneTo record a greeting message Preparing the Answering SystemGreeting Message Base Unit Greeting message samplesTo erase the greeting Preparing the Answering SystemTo review the greeting Pre-recorded greetingScroll to Recording time by pressing L13minPress the soft key At Set Select the recording time by pressing d orPress the soft key Line14Preparing the Answering System Number of Rings Handset Select the number of rings by pressing dSelect the recording mode by pressing d or Preparing the Answering System Recording Mode HandsetScroll to Recording mode by pressing Message Alert HandsetTo have a hands-free phone conversation Using the Handset HandsetMaking Calls System capabilitiesMaking Calls To adjust the receiver/speaker volume during a conversation3334444 To dial after confirming the entered numberBacklit LCD display/Lighted handset keypad To redial using the redial list Memory RedialTo put a call on hold Press HOLD/INTERCOM againVoice Enhancer Technology 00-00-32Clarity Booster To turn Voice Enhancer on, press the soft keyTo increase volume, press B. To decrease volume, press d Using the Base Unit Base UnitTo adjust the speaker volume during a conversation Press SP-PHONEHow the line buttons indicate the line status Press SP-PHONEor a line button, then press REDIAL/PAUSEPress Hold during a conversation Auto Talk Answering CallsPress C or s Talk into the MIC To hang up, press SP-PHONEPress HOLD/INTERCOM 2 times to put Ex. If you are using LineTalk Line2 First call Line 1 on holdPersonalized Name Display Caller ID ServiceHow Caller ID information is displayed Display MeaningUsing the Caller List Viewing the Caller List HandsetWhat 1 and 2 mean Using the Caller ListCalling Back from the Caller List Handset What Q meansPARKER,FRED Or B Press the soft keyScroll to Caller ID edit by pressing d Using the Caller List Caller ID Number Auto Edit HandsetTo turn on or off Caller ID Number Auto Edit feature Select Off or On by pressing d or BPress the soft key Save again To erase a specific callerTo erase all entries Press the soft key YESPhone Book TomStoring Names and Numbers Handset Selecting characters to enter names Phone BookDialing from the Phone Book Handset If you make a mistake while entering a nameFrank To search for a name by initialIndex table Alan Phone Book Chain Dial HandsetWhile you are on a call Press Menu Erased JaneErase? Phone Book Editing an Item in the Phone Book HandsetTo copy one phone book item to another handset Tom Jones Scroll to Copy all items by pressing dDialing a Stored Phone Number Base Unit Speed DialerStoring Phone Numbers Base Unit To erase a stored numberPress HOLD/INTERCOM IntercomMaking Intercom Calls Press LOCATOR/INTERCOM/TRANSFERPress C, s or HOLD/INTERCOM IntercomAnswering Intercom Calls Press SP-PHONE or LOCATOR/INTERCOM/TRANSFERWhen finished, press SP-PHONE or LOCATOR/INTERCOM/ Transfer Intercom Voice Paging Base UnitTo make a voice announcement to all handsets, press Transferring a Call During a call, press LOCATOR/INTERCOM/TRANSFERWhen the system has 2 or more handsets Transferring a CallFrom a Handset to another Handset Quick call transfer Conference Calls Conference call with 2 outside callsConference with an outside call and an intercom call Conference CallsCall Share To join a conversation Call ShareTo turn Room Monitor on for the base unit Handset Room MonitorTo turn Room Monitor on for the handset Handset Scroll to Room monitor by pressing d orTo monitor with Base Unit Room MonitorTo monitor with Handset To end monitoring, press OFFMuting Your Conversation Special FeaturesTo turn the Call Privacy feature on Call Privacy HandsetFor Rotary or Pulse Service Users Handset Base Unit Special Features Temporary Tone DialingFor Call Waiting Service Users Handset Base Unit Call Waiting Caller ID display HandsetScroll to Set flash time by pressing d Special FeaturesSelecting the flash time Handset Select the flash time by pressing d or BBase unit incoming call tone Handset Special Features Incoming Call Tone Handset Base UnitHandset incoming call tone Handset Scroll to Incoming call. by pressingSpecial Features Line Selection AutoHandset line selection Handset Base unit line selection Handset Key toneKey Tone Handset Scroll to Line selection by pressingSetting the Unit to Answer Calls Base Unit Automatic Answering OperationMonitoring Incoming Calls Base Unit To turn the incoming call monitoring feature offAutomatic Answering Operation To turn off the Answering SystemPress Message Listening to MessagesTo play back messages To play back messages for the desired linesPress the soft key Play Using the Handset Remote Operation HandsetListening to Messages To end remote operation, press OFFVoice menu To turn the Answering System on To turn the system on for the lines, pressErasing all messages Erasing MessagesErasing a specific message Press Erase while the base unit is not being usedWhen finished, press Memo or Stop Recording a Memo MessageErasing Messages Press 9 to hang up the call Press LOCATOR/INTERCOM/TRANSFER during a callPress HOLD/INTERCOM during a call Interrupting remote operationRemote Operation from a Touch Tone Phone Summary of remote operationEnter a 2-digit remote code Remote Code HandsetScroll to Remote code by pressing d or Press the soft key Save Press OFFRemote Operation from a Touch Tone Phone Voice Menu Skipping the greeting Direct commandsTurning on the Answering System After calling your unit, press * during the greetingWall Mounting Connect the AC adaptorWall Mounting To remove the wall mounting adaptor Wall Template for the Charger unitBelt Clip Connecting an optional headsetTo switch to the speakerphone while using the headset Optional HeadsetDirect Commands Menu item Command Selection itemsDirect Commands During programmingTo exit programming, press OFF Canceling Registration/Re-registration Canceling the Handset Registration HandsetRe-registering the Handset Handset & Base Unit Canceling Registration/Re-registration Press and hold LOCATOR/INTERCOM/TRANSFER for 3 secondsInvalid If the Following Appear on Your DisplayBusy Display message Cause & RemedyDenied If the Following Appear on Your DisplayTroubleshooting Problem Cause & RemedyTelephone System Troubleshooting Troubleshooting Answering System General Line SELECT, then press MessagePressing MESSAGE. Press Message Important Safety Instructions Important Safety Instructions FCC and Other InformationFCC and Other Information FCC RF Exposure Warning Index − Caller ID number auto editIndex 105 106 Specifications Energy StarFor product service When you ship the productFor your future reference
Top Page Image Contents