TG2421AL_2422AL(e).book Page 11 Tuesday, March 15, 2005 6:29 PM
Preparation
Battery charge
Place the handset on the base unit or charger for 6 hours before initial use.
LThe unit will beep once, the CHARGE indicator will light, and “Charging” will be displayed.
L“Charge completed” is displayed when the battery has been fully charged. The CHARGE indicator will remain lit.
Base unit
CHARGE indicator
Charger (KX-TG2422AL only)
CHARGE 
indicator
Note:
LTo ensure the battery charges properly, clean the charge contacts of the handset, base unit, and charger with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust, or high humidity.
Battery strength
You can confirm the battery strength on the handset display.
Battery icon | Battery strength |
5Fully charged
6Medium
7Low
When flashing: needs to be recharged.
8Discharged
Recharging the battery
Recharge the battery when:
–“Recharge battery” is displayed or 7flashes on the handset display.
–the handset beeps intermittently while it is in use.
Note:
LRecharge the handset battery for more than 15 minutes, or the display will continue showing the indication.
LIf the battery has been discharged, the handset will display “Charge for 6h” and 8when you place the handset on the base unit or charger.
11