Panasonic KX-TG2421AL operating instructions Caller ID

TG2421AL_2422AL(e).book Page 43 Tuesday, March 15, 2005 6:29 PM

	Useful Information
Problem	Cause & solution
While storing an item in	LA call is being received. Answer the call and start again
the phonebook, the	from the beginning after hanging up.
handset starts to ring.
Copying stopped with an	LThe destination handset may have lost communication
item displayed.	with the base unit, or the destination handset user may
	have pressed {C} or {s}.
	The displayed phonebook item was not copied to the
	handset. Press {OFF}. Confirm that the destination
	handset is in standby mode (i.e., not in use) and try
	again.
The display exits the	LThe handset automatically exits after 1 minute of
phonebook while	inactivity.
searching.
Caller ID
Problem	Cause & solution
The handset does not	LYou have not subscribed to Caller ID service. Contact
display the caller’s phone	your telephone company to subscribe.
number.	LIf your unit is connected to any additional telephone
	equipment such as Caller ID box or wireless telephone
	jack, disconnect the unit from the equipment and plug
	the unit directly into the wall jack.
	LIf your unit is connected to a telephone line with ADSL
	service, we recommend connecting a noise filter
	between the base unit and the telephone line jack.
	Contact your ADSL provider for details.
	LOther telephone equipment may be interfering with this
	unit. Disconnect the other equipment and try again.
	LThe caller requested not to send caller information
	(page 24).
	LIf a call is being transferred to you, the caller information
	will not be displayed.
The display exits the	LThe handset automatically exits after 1 minute of
caller list while searching.	inactivity.

43