Panasonic KX-TG2421AL operating instructions Making calls, KRecall CallL

TG2421AL_2422AL(e).book Page 16 Tuesday, March 15, 2005 6:29 PM

Making/Answering Calls

Making calls

	Soft keys
{C}	{OFF}
	Navigator key
{s}
	{MUTE}
	{CLEAR}
{PAUSE}	{HOLD}
{REDIAL}	Microphone

1 Lift the handset and press {C}. L“Talk” will be displayed.

2 Dial the phone number.

3 When finished talking, press {OFF} or place the handset on the base unit or charger.

Note:

L“Line in use” is displayed when someone is talking on the other handset (KX-TG2422AL only) or another phone.

To adjust the receiver volume

3 levels (high/medium/low) are available. While using the receiver, press {V} or {^} repeatedly.

To use the speakerphone

1 Lift the handset and press {s}. L“SP-phone” will be displayed.

2 Dial the phone number.

3 When the other party answers, speak into the microphone.

4 When finished talking, press {OFF} or place the handset on the base unit or charger.

Note:

LTalk alternately with the caller in a quiet room.

LIf the other party has difficulty hearing you, press {V} to decrease the speaker volume.

LWhile on a call, you can switch from the receiver to the speakerphone by pressing {s}. To switch back to the receiver, press {C}.

To adjust the speaker volume

6 levels (high to low) are available. While using the speaker, press {V} or {^} repeatedly.

To dial after confirming the entered number

1 Enter the phone number. Example: 3334444

KRecall CallL

LTo correct a digit, press {<} or {>} to move the cursor, then press {CLEAR}. Enter the correct number.

LIf a pause is required when dialling, press {PAUSE} where needed (page 19).

LTo cancel, press {OFF}.

2 Press {C}, {s}, or {Call}.

3 When finished talking, press {OFF} or place the handset on the base unit or charger.

To redial the last number dialled

1 Press {C} or {s}.

2 Press {REDIAL}.

16