TG2421AL_2422AL(e).book Page 33 Tuesday, March 15, 2005 6:29 PM
Programmable Settings
3 Scroll to “Set tel line” by pressing {V} or {^}, then press {>}.
4 Scroll to “Set line mode” by pressing {V} or {^}, then press {>}.
5 Press {V} or {^} repeatedly to select the desired setting.
6 Press {Save}, then press {OFF}.
Storing your area code
We recommend storing your area code before using Caller ID (page 24). Calls from the same area will be recorded in the caller list without the area code. You do not have to remove it before calling back the caller or storing in the phonebook.
1
2 Scroll to “Initial setting” by pressing {V} or {^}, then press {>}.
3 Scroll to “Set area code” by pressing {V} or {^}, then press {>}.
4 Enter your area code (max. 8 digits).
LTo correct a digit, press {<} or {>} to move the cursor, then press {CLEAR}. Enter the correct number.
5 Press {Save}, then press {OFF}.
To erase your area code
Press and hold {CLEAR} in step 4, press {Save}, then press {OFF}.
Other options
Dial lock
This feature prohibits making outside calls. The default setting is OFF.
Important:
LWhen dial lock is turned on, only phone numbers stored in the phonebook as emergency numbers (numbers stored with a # at the beginning of the name) can be dialled using the phonebook (page 20). We recommend storing emergency numbers in the phonebook before using this feature.
LWhen dial lock is turned on, you cannot store, edit, or erase items in the phonebook.
To turn dial lock on 1 Press {MENU}.
2 Scroll to “Dial lock” by pressing {V} or {^}, then press {>}.
3 Enter a
LThis password is required when turning dial lock off. We recommend writing the password down.
4 Press {Save}.
5 Press {Yes}.
L“Dial lock on” will be displayed.
6 Press {OFF}.
Note:
LIf dial lock is turned on, the handset displays “Dial lock”. While there are missed calls, “Dial lock” is not displayed when the handset is off the base unit or charger.
33