Panasonic KX-TG2421AL operating instructions Handset key tone, Re-registering the handset

TG2421AL_2422AL(e).book Page 34 Tuesday, March 15, 2005 6:29 PM

Programmable Settings

To turn dial lock off 1 Press {MENU}.

2 Scroll to “Dial lock” by pressing {V} or {^}, then press {>}.

3 Enter the same password that was entered when dial lock was turned on.

4 Press {Save}.

5 Press {Yes}.

L“Dial lock off” will be displayed.

6 Press {OFF}.

Note:

LIf you forget the password, consult your nearest Panasonic service centre.

Handset key tone

You can select whether or not key tones are heard when keys are pressed. Includes confirmation tones and error tones. The default setting is ON.

1 Press {MENU}.

2 Scroll to “Initial setting” by pressing {V} or {^}, then press {>}.

3 Scroll to “Key tone” by pressing {V} or {^}, then press {>}.

4 Press {V} or {^} repeatedly to select “On” or “Off”.

5 Press {Save}, then press {OFF}.

Re-registering the handset

If “No link to base. Move closer to base, try again.” is displayed even when the handset is near the base unit, you may need to re-register the handset to the base unit.

Important:

LMake sure the base unit is not being used.

LHave the handset and base unit near each other when re-registering the handset.

LKX-TG2422AL only:

Confirm the extension number of the handset which has lost the communication by placing the handset on the base unit or charger.

If you re-register the handset using the other handset’s extension number [1] or [2], the other handset will not function.

1 Handset:

Press {MENU}.

2 Scroll to “Initial setting” by pressing {V} or {^}, then press {>}.

3 Scroll to “Registration” by pressing {V} or {^}, then press {>}.

4 KX-TG2421AL base unit: Press and hold {HANDSET LOCATOR} until the CHARGE indicator flashes.

KX-TG2422AL base unit:

Press and hold the handset locator button that corresponds to the handset you want to re-register ({HANDSET LOCATOR 1} or {HANDSET LOCATOR 2}) until the CHARGE indicator flashes.

LAfter the CHARGE indicator starts flashing, the rest of the procedure must be completed within 1 minute.

5 Handset:

Press {OK}, then wait until the handset beeps.

LRegistration is complete.

34