Panasonic KX-TG2130 operating instructions Handset ringer on/off, Dialing mode

Page 13

Programming

2 Select the desired ringer tone by using {V} or {^}.

3 Press {EDIT}, then press {OFF}.

Handset ringer on/off

You can turn the ringer on/off. The default setting is “ON”.

Handset

1 Press {FUNCTION} 5 times until “RINGER“ is displayed.

2 Select “ON” or “OFF” by using {V} or {^}. 3 Press {EDIT}, then press {OFF}.

Note:

L When the ringer is set to off, the handset does not ring for outside calls.

Dialing mode

If you cannot make calls, change this setting according to your telephone line service. The default setting is “TONE”. “TONE”: For tone dial service.

“PULSE”: For rotary pulse dial service.

Handset

1 Press {FUNCTION} 6 times until “DIAL MODE” is displayed.

2 Select “TONE” or “PULSE” by using {V} or {^}.

3 Press {EDIT}, then press {OFF}.

Resetting the handset to its default setting

Feature		Default setting
Display language		ENGLISH

Area code		---

Handset ringer		RINGER TONE 1
tone

Handset ringer		ON

Dial mode		TONE

Default setting		NO

Handset receiver		Vol. 2
volume level


Handset

1 Press {FUNCTION} 7 times until “DEFAULT“ is displayed.

2 Select “YES” or “NO” by using {V} or {^}. 3 Press {EDIT}.

Note:

L The following items are retained:

–Redial number

–Caller list

–Phonebook items

–Day and time setting

–Greeting message

–Voice memos

–Caller messages

–Ring count setting

–Remote code

For assistance, please visit http://www.panasonic.com/help

13

Image 13

Contents Operating Instructions Table of ContentsIntroduction Symbols used in these operating instructionsAbout these operating instructions Included accessories Accessory informationAdditional/replacement accessories Sales and support informationSave These Instructions Important safety instructionsBattery InstallationMedical Base unit location/avoiding noise For best performanceEnvironment Routine careConnecting the AC adaptor and telephone line cord Setting up the base unitIf you subscribe to a DSL service Battery installation/replacement Setting up the handsetBattery charge/Handset registration Panasonic battery performance Operation Operating time Recharging the batteryBase unit ControlsHandset Base unit display itemsProgrammable settings Handset ringer on/off Dialing modeAnswering calls Pause button for PBX/long distance service usersTemporary ringer off Handset locator Useful features during a callStoring names and numbers Handset phonebookFinding and calling a handset phonebook item Character table for entering names KeyErasing all items in the handset phonebook Erasing an item in the handset phonebookCaller list Using Caller ID serviceWhat the display means Editing a caller’s phone number before calling back Viewing the caller list and calling backMemory capacity Answering systemTurning the answering system on/off Screening callsPrerecorded greeting message Voice memo Key CommandRemote operation Recording a voice memoRemote commands Using the answering system remotelyKey Remote command Turning on the answering system remotelyRing Select switch Answering system settingsFor Voice Mail service subscribers Remote codeWall mounting Headset optionalGeneral use Problem Cause/solution TroubleshootingProgrammable settings Problem Cause/solution Battery recharge Problem Cause/solutionCaller ID Problem Cause/solution Problem Cause/solutionAnswering system Problem Cause/solution FCC and other information Useful Information Useful Information Specifications Warranty Limited Warranty Limits And Exclusions Customer Services Directory Customer servicesPanasonic Puerto Rico, Inc When you ship the productCopyright