Programming
Programmable settings
You can customize the unit by programming the following features.
Day and time
Set the correct day and time. When you play back a message from the answering system (page 21), the unit announces the day and time it was recorded.
Base unit
1 Press and hold {DAY/CHECK} until the current day is announced, then release {DAY/CHECK}.
2 Press and hold {HOUR} until the current hour is announced, then release {HOUR}.
3 Press and hold {MIN} until the current minute is announced, then release {MIN}.
L If you keep holding down {MIN}, the unit begins to announce the minutes by
Note:
L If you want to check the current day and time setting, press {DAY/CHECK} once without holding.
L If you do not set the day and time, “ ” and the number of recorded messages are alternately displayed while the answering system is turned on. Day and time announcements for caller message will be incorrect.
Display language
You can select English, Spanish, or French as the display language. The default setting is “ENGLISH”.
Handset
1 Press {FUNCTION} 2 times until “LANGUAGE” is displayed.
2 Select “ENG”, “ESP”, or “FRA” by using {V} or {^}.
3 Press {EDIT}, then press {OFF}.
Area code
We recommend storing your area code before using Caller ID. Calls from the same area will be recorded in the caller list without the area code. You do not have to remove it before calling back the caller or storing in the phonebook.
Handset
1 Press {FUNCTION} 3 times until “AREA CODE” is displayed.
2 Enter your area code (max. 3 digits).
3 Press {EDIT}, then press {OFF}.
Handset ringer tone
You can change the ringer tone heard when an outside call is received. There are 3 ringer tones. The default setting is
“RINGER TONE: 1”.
Handset
1 Press {FUNCTION} 4 times until “RINGER TONE” is displayed.
12For assistance, please visit http://www.panasonic.com/help