Answering System
Important:
L In order to remotely access the answering system, you must first set a remote code (page 24). This code must be entered each time you operate the answering system remotely.
Using the answering system remotely
1
2 After the greeting message starts, press any dial key ({0} - {9}, {#}, or {*}) to skip the greeting.
3 After the greeting message stops, enter your
L The voice guidance starts.
L Follow the voice guidance as necessary.
4 Press a key to select the function you want.
5 When finished, hang up.
Note:
L You can ignore the voice guidance and control the unit using remote commands (page 23).
L If you enter the wrong remote code more than 3 times, the call is disconnected.
Voice guidance
During remote operation, the unit’s voice guidance prompts you to press the desired button to perform a specific operation.
Operate the answering system by following the guidance as necessary.
Note:
L If you do not press any dial keys within 7 seconds after the voice guidance prompt is heard, the unit disconnects your call.
Remote commands
You can press dial keys to access certain answering system functions without waiting for the voice guidance to prompt you.
Key | Remote command |
{1} | Repeat message |
| (during playback)*1 |
{2} | Play new messages*2 |
{3} | Skip message |
| (during playback) |
|
|
{4} | Turn answering system |
| on/off |
|
|
{7} | Review the remote voice |
| menu again |
{0} | Erase currently playing |
| message |
|
|
*1 If you press {1} 2 times during playback or press {1} once while the unit announces the message number, the previous message is played.
*2 When you have no new messages, the unit plays back all messages.
To stop playing, press {2} again.
Turning on the answering system remotely
If the answering system is off, you can turn it on remotely.
1 Dial your phone number from a touch tone phone.
For assistance, please visit http://www.panasonic.com/help | 23 |