Panasonic KX-TG2340JX operating instructions Specifications, Safety Instructions

Page 59

PQQX14670ZA.book 59 ページ ２００５年２月２２日 火曜日 午後１２時０分

Safety Instructions

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE OF MOISTURE.

If there is any trouble, disconnect the unit from the telephone line and connect a known working phone. If the known working phone operates properly, do not reconnect the unit to the telephone line until the trouble has been repaired. If the known working phone does not operate properly, consult your telephone company.

Specifications

nBase Unit

Power Supply: AC Adaptor (220–240 V AC, 50/60 Hz)

Power Consumption:

Standby: Approx. 2.0 W

 

Maximum: Approx. 5.4 W

Frequency:

2.4 GHz – 2.48 GHz

Dimensions (H x W x D):

Approx. 85 mm x 175 mm x 200 mm

Mass (Weight):

Approx. 460 g

nHandset

Power Supply: Ni-MH battery (3.6 V, 830 mAh)

Frequency:

2.4 GHz – 2.48 GHz

Dimensions (H x W x D):

Approx. 208 mm x 52 mm x 39 mm

Mass (Weight):

Approx. 190 g

Security Codes:

1,000,000

n Dialing Mode:

Tone (DTMF)/Pulse

nOperating Environment: 5 °C – 40 °C

Specifications are subject to change without notice.

Useful Information

59

Page 58 Page 60
Image 59
Page 58 Page 60
Contents
Pulse-or-tone dialing capability Charge the battery for 6 hours before initial useDigital Cordless Phone For your future reference Accessories includedBase Unit Location/Noise Battery ChargeFor Best Performance Contents Contents Base unit Location of ControlsHandset navigator key Location of ControlsHandset Handset soft keysConnections InstallationDisplay prompt Battery strength Installation Installing the Battery in the HandsetBattery strength To replace the batteryRecharge InstallationBattery information Battery replacementProgramming Guidelines Handset Programmable SettingsHow to select a function item from the menu Main menu Programmable Settings Function Menu Table HandsetTo confirm the date and time, repeat steps 1 and 2 above Programmable Settings Date and Time HandsetLine Mode Handset Programmable Settings Dialing Mode HandsetAuto talk Off KBack d B Save L Programmable Settings Auto Talk HandsetScroll to Auto talk by pressing d or B Select On or Off by pressing d or BRinger volume Low High KBack dB SaveL Programmable Settings Ringer VolumeHandset ringer volume Handset Select the desired volume level by pressing d or BMake sure the base unit is not being used Programmable SettingsBase unit ringer volume Base Unit To turn the ringer on, press Volume orSelect the desired ringer tone by pressing d Programmable Settings Ringer ToneHandset ringer tone Handset Scroll to Ringer tone by pressing d orLCD Contrast Handset Setting the base unit ringer tone by using the HandsetHands-free Digital Duplex Speakerphone Using the Handset HandsetMaking Calls To have a hands-free phone conversationTo dial after confirming the entered number To adjust the receiver/speaker volume during a conversationTo redial using the redial list Memory Redial Making CallsBacklit LCD display/Lighted handset keypad To put a call on holdVoice Enhancer Technology To return to the call, press SP-PHONE Making Calls Using the Base Unit Base UnitTo adjust the speaker volume during a conversation Press SP-PHONEOFF s Auto Talk Answering CallsBase Unit Talk into the MIC To hang up, press SP-PHONEDisplay Meaning Caller ID ServiceHow Caller ID information is displayed Private name displayAnnouncing caller information Talking Caller ID Caller ID Service Using Talking Caller IDTo turn Talking Caller ID on or off Caller ID ServiceHandset Talking Caller ID feature Handset Base unit Talking Caller ID feature HandsetCaller List Using the Caller ListViewing the Caller List Press Rcvd calls, , or To enterIf a caller calls more than once Using the Caller ListCalling Back from the Caller List Handset What , meansPress Select Press Edit Press Rcvd calls, d, or B to enter the Caller ListScroll to the desired caller by pressing d or Press Select Press Rcvd calls, d, or B to enterTo erase all entries Using the Caller List Erasing Caller Information HandsetTo erase a specific caller To store an emergency number Phone BookStoring Names and Numbers Handset For example, to enter Tom If you make a mistake when entering a name or numberPhone Book Selecting characters to enter namesPress d repeatedly until the desired name is displayed Phone Book Dialing from the Phone Book HandsetPress Search To search for a name by initialSearch for the desired item by pressing d or Chain Dial HandsetIndex table While you are on a call Press MenuErasing an Item in the Phone Book Handset Phone Book Editing an Item in the Phone Book HandsetFrom Base Unit IntercomMaking Intercom Calls From HandsetCall from Base Intercom Answering Intercom CallsPress C, s or HOLD/INTERCOM Press SP-PHONE or LOCATOR/INTERCOMPress SP-PHONE or LOCATOR/INTERCOM to answer Transferring a CallFrom the Handset to the Base Unit From the Base Unit to the HandsetQuick call transfer Transferring a CallDuring a call, press LOCATOR/INTERCOM Conference CallsTo join a conversation Call Share Muting Your Conversation Special FeaturesFor Call Waiting Service Users Temporary Tone DialingSelecting the flash time Handset Special Features Using the Pause KeyFor PBX Line/Long Distance Calls Handset Flash Button Handset Base UnitScroll to Incoming call. by pressing d Special Features Incoming Call Tone Handset Base UnitHandset incoming call tone Handset Base unit incoming call tone HandsetKey tone KBack d B Save L Special Features Key Tone HandsetScroll to Key tone by pressing d or B Select Off or On by pressing d or BPress Dial Lock Special FeaturesDial Lock Handset Base Unit @@@@ Enter the password set when the Dial LockEnter the password set when the Dial Lock was turned on Was turned onHandset 1 Registered Press and hold LOCATOR/INTERCOM until a beep soundsTo attach the shoulder rest attachment Belt ClipShoulder Rest Attachment To attach the belt clip To remove the belt clipWall Template Wall MountingOptional Headset Connecting the optional headsetTo switch to the speakerphone while using the headset During programming Direct CommandsMenu item Command Selection items Display message Cause & Remedy If the Following Appear on Your DisplayTroubleshooting Problem Cause & Remedy TroubleshootingBut Recharge battery is Recharge battery isSafety Instructions Safety Instructions SpecificationsPQQX14670ZA F0205-0D 62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan
Related manuals
Manual 60 pages 46.1 Kb