Panasonic KX-TG4133M, KX-TG4132N Caller list, Viewing the caller list and calling back

Caller ID Service

ringer you selected for that group rings after caller information is displayed. If you select “Current ringer” (default), the unit uses the ringer tone you selected on page 20 when calls from this group are received.

1{C} s {MENU}

2{r}: “Group” s{SELECT}

3{r}: Select the desired group. s

{SELECT}

4{r}: Select the current setting of the ringer ID. s {SELECT}

5{r}: Select the desired ringer tone. s

{SAVE}

6{OFF}

Caller list

Important:

LOnly 1 person can access the caller list at a time.

LMake sure the unit’s date and time setting is correct (page 12).

Viewing the caller list and calling back

1{<} CID

2Press {V} to search from the most recent call, or {^} to search from the oldest call.

L If > is displayed, not all of the information is shown. To see the remaining information, press {>}. To return to the previous screen, press

{<}.

3To call back, press {C}. To exit, press {OFF}.

Note:

LIf the entry has already been viewed or answered, “Q” is displayed, even if it was viewed or answered using another handset.

Editing a caller’s phone number before calling back

You can edit a phone number in the caller list by removing its area code and/or the long distance code “1”.

1{<} CID

2{r}: Select the desired entry.

3Press {EDIT} repeatedly until the phone number is shown in the desired format.

1Local phone number

Example: 321-5555

2Area code – Local phone number

Example: 555-321-5555

31 – Area code – Local phone number

Example: 1-555-321-5555

4{C}

Caller ID number auto edit feature

Once you call back an edited number, the handset which was used to call back remembers the area code and format of the edited number. The next time someone calls from the same area code, caller information is customized by the handset as follows:

–When the call is being received, the Caller ID number is displayed in the same format as the edited number.

–After the call has ended, the caller’s phone number is displayed in the same format as the edited number, when reviewed from the caller list.

For example, you can use this feature to set the handset to ignore the area code of callers in your area, so that you can call these local numbers using caller information without dialing the area code.

To activate this feature, you must edit an entry in the caller list, then call that number. After that, phone numbers from that caller’s area code are edited automatically.

This feature can be set for each handset (page 21). The default setting is “On”.

Note:

LPhone numbers from the 4 most recently edited area codes are automatically edited.

For assistance, please visit http://www.panasonic.com/help 27