| Useful Information |
|
|
|
|
|
|
Error messages |
|
|
|
Display message | Cause/solution |
Base no power | L The handset has lost communication with the base |
or | unit. Move closer to the base unit and try again. |
L Unplug the base unit’s AC adaptor to reset the unit. | |
No link. | Reconnect the adaptor and try again. |
L The handset’s registration may have been canceled. | |
adaptor. | |
Busy | L The called unit is in use. |
| L Other units are in use and the system is busy. Try |
| again later. |
| L The handset you are using is too far from the base |
| unit. Move closer and try again. |
Call phone company for your | L You have not stored the voice mail access number. |
access # | Store the number (page 34). |
Check tel line | L The supplied telephone line cord has not been |
| connected yet or not connected properly. Check the |
| connections (page 9). |
Error!! | L Recording was too short. Try again. |
Invalid | L There is no handset registered to the base unit |
| matching the handset number you entered. |
| L The handset is not registered to the base unit. |
| Register the handset (page 25). |
Requires subscription to | L You must subscribe to a Caller ID service. Once you |
Caller ID. | receive caller information after subscribing to a |
| Caller ID service, this message will not be displayed. |
Use rechargeable battery. | L A wrong type of battery such as Alkaline or |
| Manganese was inserted. Use only the rechargeable |
|
For assistance, please visit http://www.panasonic.com/help | 39 |