Making/Answering Calls
R If another phone is connected to the same line, you can also take the call by lifting its handset.
R While an outside call is on hold, the
Mute
While mute is turned on, you can hear the other party, but the other party cannot hear you.
Base unit / 
Handset
1Press MMUTEN during conversation. R MMUTEN flashes.
2To return to the conversation, press MMUTEN again.
Note:
R MMUTEN is a soft key visible on the display during a call.
Flash
Base unit / 
Handset
MFLASHN allows you to use the special features of your host PBX such as transferring an extension call, or accessing optional telephone services.
Note:
R To change the flash time, see page 23.
For call waiting or Call Waiting Caller ID service users
To use call waiting or Call Waiting Caller ID, you must first subscribe with your service provider/ telephone company.
This feature allows you to receive calls while you are already talking on the phone. If you receive a call while on the phone, you will hear a call waiting tone.
If you subscribe to both Caller ID and Call Waiting with Caller ID services, the 2nd caller’s information is displayed on the base unit or handset that is in use after you hear the call waiting tone.
Base unit / 
Handset
1Press MCALL WAITN to answer the 2nd call.
2 To switch between calls, press MCALL WAITN.
Note:
R Please contact your service provider/telephone company for details and availability of this service in your area.
Temporary tone dialing (for rotary/ pulse service users)
You can temporarily switch the dialing mode to tone when you need to access
Base unit / 
Handset
Press * (TONE) before entering access numbers which require tone dialing.
Handset clarity booster
This feature can improve sound clarity when the handset is used in an area where there may be interference. During an outside call, this feature is turned on automatically when necessary.
R When this feature is turned on, 
is displayed.
Handset equalizer
This feature clarifies the voice of the person you are talking to, producing a more
1Press MMENUN while talking.
2MbN: “Equalizer” a MSELECTN
3 MbN: Select the desired setting.
4 Press MOKN to exit.
Note:
R When this feature is activated, 
is displayed while talking.
R Depending on the condition and quality of your telephone line, this feature may emphasize existing line noise. If it becomes difficult to hear, turn this feature off.
R This feature is not available while using the speakerphone.
For assistance, please visit http://www.panasonic.com/help | 15 |