Caller ID Service
5MbN: Select the desired ringer tone. a MSAVEN
6 MOFFN
Caller list
Important:
R Only 1 person can access the caller list at a time.
R Make sure the unit’s date and time setting is correct (page 12).
Viewing the caller list and calling back
Base unit / 
Handset
1Proceed with the operation for your unit. Base unit: MCIDN
Handset: MFN CID
2Press MCN to search from the most recent call, or MDN to search from the oldest call.
3Proceed with the operation for your unit.
Base unit:
–To call back, lift the corded handset.
–To exit, press MnN (EXIT).
Handset:
–To call back, press M
N.
–To exit, press MOFFN.
Note:
R If the entry has already been viewed or answered, “
” is displayed, even if it was viewed or answered using another unit.
R In step 2, if 
is displayed, not all of the information is shown. To see the remaining information:
Base unit:
Press M
N. To return to the previous screen, press M
N.
Handset:
Press MEN. To return to the previous screen, press MFN.
Editing a caller’s phone number before calling back
You can edit a phone number in the caller list by removing its area code and/or the long distance code “1”.
Base unit / 
Handset
1Proceed with the operation for your unit. Base unit: MCIDN
Handset: MFN CID
2MbN: Select the desired entry.
3Press MEDITN repeatedly until the phone number is shown in the desired format.
ALocal phone number
Example:
BArea code – Local phone number
Example: 555-321-5555
C1 – Area code – Local phone number
Example:
4Proceed with the operation for your unit. Base unit: Lift the corded handset.
Handset: M
N
Caller ID number auto edit feature
Base unit / 
Handset
Once you call back an edited number, the unit which was used to call back remembers the area code and format of the edited number. The next time someone calls from the same area code, caller information is customized by the unit as follows:
–When the call is being received, the Caller ID number is displayed in the same format as the edited number.
–After the call has ended, the caller’s phone number is displayed in the same format as the edited number, when reviewed from the caller list.
For example, you can use this feature to set the unit to ignore the area code of callers in your area, so that you can call these local numbers using caller information without dialing the area code. To activate this feature, you must edit an entry in the caller list, then call that number. After that, phone numbers from that caller’s area code are edited automatically.
This feature can be set for each unit (page 23). The default setting is “On”.
For assistance, please visit http://www.panasonic.com/help | 29 |