Cisco Systems ATA 188, ATA 186 CallCmd, Call Waiting Caller ID, Maximum of 248 characters, 930

Page 29

Chapter 5 Parameters and Defaults

Operational Parameters

Table 5-3 PaidFeatures Parameter Bit Definitions (continued)

Bit Number

Definition

 

 

6 and 22

Not used for H.323.

 

 

7 and 23

Not used for H.323.

 

 

8 and 24

Caller ID. This service enables the Cisco ATA 186 to generate a Caller ID signal to drive a Caller ID display

 

device attached to the FXS line.

 

 

9 and 25

Not used for H.323.

 

 

10 and 26

Not used for H.323.

 

 

11 and 27

Call Waiting Caller ID.

 

 

12-14 and

Reserved.

28-30

 

 

 

 

15 and 31

Fax mode. This service allows the user to set the Cisco ATA to Fax mode on a per-call basis. For Fax mode, use

 

the following settings:

 

G711 codec only

 

No silence suppression

 

No FAX tone detection

 

 

 

CallCmd

Description

Command table that controls call commands such as turning on/off caller ID.

For detailed information on the CallCmd parameter, see Chapter 6, “Call Commands.”

Value Type

Alphanumeric string

Range

Maximum of 248 characters

Default

U.S. Call Command Default

Af;AH;BS;NA;CS;NA;Df;EB;Ff;EP;Kf;EFh;HH;Jf;AFh;HQ;I*67;gA*82;fA#90v#;OI;H#72v#;bA#74

v#;cA#75v#;dA#73;eA*67;gA*82;fA*70;iA*69;DA*99;xA;Uh;GQ;

Voice Configuration Menu Access Code

930

Related Parameters

CallFeatures, page 5-27

PaidFeatures, page 5-28

CallerIdMethod, page 5-38

SigTimer, page 5-31

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for H.323 (version 3.0)

 

OL-4804-01

5-29

 

 

 

Image 29
Contents Parameters and Defaults Configuration Text File Template This section contains only one parameter-UIPassword UIPasswordUser Interface UI Security Parameter Sections that follow describe these parametersUseTFTP Parameters for Configuration Method and EncryptionUseTFTP, CfgInterval, TftpURLRelated Parameters CfgInterval DefaultEncryptKey UseTFTP, TftpURL,UseTFTP, TftpURL, EncryptKeyEx, EncryptKeyEx320 Dhcp Network Configuration ParametersNot applicable for this parameter UseTFTP, TftpURL, EncryptKey,StaticIp Voice Configuration Menu Access Code Related ParametersStaticRoute DHCP, StaticRoute, StaticNetMask,Ntpip StaticNetMaskDHCP, StaticIp, StaticNetMask, 255.255.255.0DNS1IP AltNTPIPAltNTPIP, TimeZone, NTPIP, TimeZone,OpFlags, VLANSettingDNS2IP AltGk, AltGkTimeOut, GkTimeToLive, GkId, Disables gatekeeper-routed callsParameters GkOrProxyGkId Default RangeGkTimeToLive AltGkAltGk, ConnectMode, page 5-32-Bit AltGkTimeOut251 This parameter is the password for the Phone 1 port UID1, PWD0, PWD1, UseLoginID, LoginID0, LoginID1,UID0 PWD0UID1 UID0, PWD0, PWD1, UseLoginID, LoginID0, LoginID1,PWD1 LoginID0This parameter is the password for the Phone 2 port UseLoginID LoginID1LoginID1, PWD0, PWD1, UseLoginID, AutMethod, LoginID0, PWD0, PWD1, UseLoginID, AutMethod,LoginID0, LoginID1, PWD0, PWD1, NTPIP, AltNTPIP, Range Default Voice Configuration Menu Access CodeAutMethod GatewayRange Default Audio Configuration ParametersMediaPort 16384RxCodec TOS, VLANSetting,TxCodec LBRCodec, NumTxFrames, TxCodec, AudioMode,LBRCodec, NumTxFrames, RxCodec, AudioMode, LBRCodec300 AudioMode, page 5-24-Bits 1 TxCodec, RxCodec, NumTxFrames,Bit Number Definition AudioModeLBRCodec, ConnectMode, RxCodec, LBRCodec, RxCodec, TxCodec, NumTxFramesExamples TOS Operational Parameters0x0000A8B8 255Bit Number CallFeaturesCallerIdMethod, CallFeatures, CallCmd, CallerIdMethod, SigTimer, PaidFeatures315 Call waitingCallCmd CallFeatures, PaidFeatures, CallerIdMethod, SigTimer,Call Waiting Caller ID Maximum of 248 characters317 FeatureTimerSigTimer FeatureTimer2ConnectMode Use fast-start procedure for H.225/Q.931 Use slow-start procedure for H.225/Q.931 and H.245Disable/enable h245 tunneling Disable/enable fax pass-through redundancyOpFlags TftpURL, DHCP, VLANSetting,OpFlags Parameter Operational Features to Turn On or Off TimeZone 302 Telephone Configuration ParametersAdditional Description NTPIP, AltNTPIP,CallerIdMethod 316 Polarity0x00019e60 FXSOutputLevel FXSInputLevel304 To 2 dBRingOnOffTime, Tone Configuration ParametersTone Parameter Syntax-Basic Format Parameters and Defaults Tone Configuration Parameters Each tone is specified by 11 integers, as follows Tone Parameter Syntax-Extended FormatsExtended Format a Cadence With Two On-Off Pairs Extended Format BCadence with Three On-Off Pairs ReorderTone Parameter Example1 Component Setting ExplanationReorderTone Parameter Example Recommended Values Default values using the Basic formatSpecific Tone Parameter Information DialToneReorderTone BusyToneCallWaitTone RingbackTone922 923AlertTone RingOnOffTimeDialPlan Dial Plan ParametersRecommended Values DialPlan, DialPlanEx, IPDialPlan,Dial Plan Commands, Dial Plan Rules, Dial Plan Examples, Dial Plan CommandsCisco ATA supports the following dial plan rules Dial Plan RulesSyntax Example‘P’ Rule to Support Dial Prefix Call Prefix prefix+num is shown in the prserv log Log InformationThis rule is for blocking call numbers This rule blocks call numbers beginning with 1900 orSCC CmdCLIP or CLIPnum are shown in the prserv log ‘X’ Rule for Call Blocking and Call Forwarding BlockingFollowing dial plan Dial Plan ExamplesFollowing dial plans Dial Plan ExampleDialPlanEx Diagnostic ParametersIPDialPlan 310SyslogIP NPrintfExtended IP address 0.0.514Bit Number Type of Messages to Trace SyslogCtrlCFGID-Version Parameter for Cisco ATA Configuration File OL-4804-01
Related manuals
Manual 228 pages 37.51 Kb Manual 208 pages 28.48 Kb Manual 166 pages 49.11 Kb Manual 48 pages 9.1 Kb Manual 208 pages 5.39 Kb Manual 14 pages 13.53 Kb

ATA 188, ATA 186 specifications

The Cisco Systems ATA 186, or Analog Telephone Adapter, revolutionized the way traditional telephony interacted with Voice over Internet Protocol (VoIP) systems. Designed primarily for home and small office use, the ATA 186 allows users to connect standard analog phones and fax machines to a network, enabling them to take advantage of the benefits of VoIP technology.

One of the defining features of the ATA 186 is its dual port architecture. It includes two FXS ports, allowing users to connect up to two analog telephones. This functionality means that multiple devices can leverage VoIP services simultaneously without the need for separate adapters for each phone. The flexibility of the ATA 186 helps streamline the user experience, facilitating voice communication over an IP network while ensuring users can still use their existing phone equipment.

The ATA 186 employs various technologies to maintain high-quality voice calls. It supports standard voice codecs such as G.711 and G.729, which ensure efficient bandwidth usage while preserving call clarity. The adaptive jitter buffer technology further enhances call quality, compensating for network variations and minimizing latency, which is crucial for clear and uninterrupted conversations.

Additionally, the ATA 186 provides users with advanced calling features that were traditionally available only on PBX systems. These features include caller ID, call waiting, and voicemail functionality, integrating seamlessly with typical telephony services. The device also supports T.38 fax relay, allowing users to send and receive faxes over the internet, thus addressing the needs of environments where fax communication remains essential.

The security of VoIP conversations is also a priority for the ATA 186. It employs encryption protocols such as Secure Real-time Transport Protocol (SRTP) and Transport Layer Security (TLS), ensuring that voice data is securely transmitted across the network. This focus on security helps protect sensitive information transmitted during calls.

Installation and configuration of the ATA 186 is streamlined, with an intuitive web-based interface that simplifies the setup process. This accessibility makes it suitable for users with varying levels of technical expertise, as frequently required adjustments, such as network configurations and firmware updates, can be easily managed.

In conclusion, the Cisco Systems ATA 186 stands out as a versatile and robust solution for users looking to integrate analog phones into a VoIP environment. With its dual port capabilities, high-quality voice codecs, advanced call features, and security measures, it offers a compelling choice for both residential and commercial users seeking seamless telephony integration. As technology evolves, devices like the ATA 186 remain cornerstones in bridging traditional telephony with modern communication systems.