Chapter 5 Parameters and Defaults
Dial Plan Parameters
Example 1
This rule prepends 1212 to dial strings that have a leading digit of 2 to 9.
Note Note: ‘R’ rules can replace most ‘P’ rules; for example, Pn12345 is the same as
Example 2
This removes the first dialed digit, then prepends 0033 to the dialed string. For example, if the number 0148336134 is dialed, the resulting string becomes 0033148336134.
Example 3
This removes the first four dialed digits, then prepends 0 to the dialed string. For example, if the number 0033148336134 is dialed, the resulting string becomes 0148336134.
Log Information
The Call Prefix <prefix>+<num> is shown in the prserv log.
‘C’ Rule for Call Blocking
This rule is for blocking call numbers.
Syntax
Cnnnn
where nnnn is the leading set of digits of the blocked call number; nnnn can be composed with subrule matching and range. The rule is triggered when the leading digits of a dialed string match the string nnnn.
The ‘C’ rule does not work with negation.
Example:
C1900C1888 or C(19001888)
This rule blocks call numbers beginning with 1900 or 1888.
Log Information
The Call Block <num> is shown in the prserv log, and a busy tone is being played.
‘F’ Rule for Call Forwarding Blocking
This rule is for blocking call forwarding numbers.
Syntax
Fnnnn
where nnnn is the leading set of digits of the blocked call forwarding number; nnnn can be composed with subrule matching and range. The rule is triggered when the leading digits of a dialed forwarding number match the string nnnn. The ‘F’ rule does not work with negation.
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for H.323 (version 3.0)
| ||
|