Cisco Systems ATA 186, ATA 188 manual ConnectMode

Page 32

Chapter 5 Parameters and Defaults

Operational Parameters

Table 5-4 SigTimer Parameter Bit Definitions

Bit Number

Definition

 

 

0-7

Call waiting period—The period between each burst of call-waiting tone.

 

Range: 0 to 255 in 0.1 seconds

 

Default: 100 (0x64=100 seconds)

 

 

8-13

Reorder delay—The delay in playing the reorder (fast busy) tone after the far-end caller hangs up.

 

Range: 0 to 62 in seconds

 

Default—5 (seconds)

 

63—Never play the reorder tone.

 

 

14-19

Ring timeout—When a call is not answered, this is the amount of time after which Cisco ATA rejects the

 

incoming call.

 

Range—0 to 63 in 10 seconds

 

Default—6 (60 seconds)

 

0—Never times out

 

 

20-25

Not used by H.323.

 

 

26-27

Minimum hook flash time—The minimum on-hook time required for hook flash event.

 

Range: 0 to 3

 

Default: 0 (60 ms)

 

Other possible values: 1=100 ms, 2=200 ms, 3=300 ms.

 

 

28-31

Maximum hook flash time—The maximum on-hook time allowed for hook flash event.

 

Range: 0 to 15

 

Default: 0 (1000 ms)

 

Other possible values: 1=100 ms, 2=200 ms, 3=300 ms, 4=400 ms, 5=500 ms, 6=600 ms, 7=700 ms, 8=800

 

ms, 9=900 ms, 10=1000 ms, 11=1100 ms, 12=1200 ms, 13=1300 ms, 14=1400 ms, 15=1500 ms.

 

 

ConnectMode

Description

This parameter is a 32-bit bitmap used to control the connection mode of the selected call signaling protocol. Table 5-5 on page 5-33provides bit definitions for this parameter.

Value Type

Bitmap

Default

0x00060400

Voice Configuration Menu Access Code

311

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for H.323 (version 3.0)

5-32

OL-4804-01

 

 

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Parameters and Defaults Configuration Text File Template UIPassword This section contains only one parameter-UIPasswordUser Interface UI Security Parameter Sections that follow describe these parametersParameters for Configuration Method and Encryption UseTFTPUseTFTP, CfgInterval, TftpURLRelated Parameters Default CfgIntervalEncryptKey UseTFTP, TftpURL,UseTFTP, TftpURL, EncryptKeyEx, EncryptKeyEx320 Network Configuration Parameters DhcpNot applicable for this parameter UseTFTP, TftpURL, EncryptKey,Voice Configuration Menu Access Code Related Parameters StaticIpStaticRoute DHCP, StaticRoute, StaticNetMask,StaticNetMask NtpipDHCP, StaticIp, StaticNetMask, 255.255.255.0AltNTPIP DNS1IPAltNTPIP, TimeZone, NTPIP, TimeZone,OpFlags, VLANSettingDNS2IP Disables gatekeeper-routed calls AltGk, AltGkTimeOut, GkTimeToLive, GkId,Parameters GkOrProxyDefault Range GkIdGkTimeToLive AltGkAltGk, ConnectMode, page 5-32-Bit AltGkTimeOut251 UID1, PWD0, PWD1, UseLoginID, LoginID0, LoginID1, This parameter is the password for the Phone 1 portUID0 PWD0UID0, PWD0, PWD1, UseLoginID, LoginID0, LoginID1, UID1PWD1 LoginID0This parameter is the password for the Phone 2 port LoginID1 UseLoginIDLoginID1, PWD0, PWD1, UseLoginID, AutMethod, LoginID0, PWD0, PWD1, UseLoginID, AutMethod,Range Default Voice Configuration Menu Access Code LoginID0, LoginID1, PWD0, PWD1, NTPIP, AltNTPIP,AutMethod GatewayAudio Configuration Parameters Range DefaultMediaPort 16384TOS, VLANSetting, RxCodecTxCodec LBRCodec, NumTxFrames, TxCodec, AudioMode,LBRCodec LBRCodec, NumTxFrames, RxCodec, AudioMode,300 AudioMode, page 5-24-Bits 1 TxCodec, RxCodec, NumTxFrames,Bit Number Definition AudioModeLBRCodec, ConnectMode, RxCodec, LBRCodec, RxCodec, TxCodec, NumTxFramesExamples Operational Parameters TOS0x0000A8B8 255Bit Number CallFeaturesCallerIdMethod, PaidFeatures CallFeatures, CallCmd, CallerIdMethod, SigTimer,315 Call waitingCallFeatures, PaidFeatures, CallerIdMethod, SigTimer, CallCmdCall Waiting Caller ID Maximum of 248 charactersFeatureTimer 317FeatureTimer2 SigTimerConnectMode Use slow-start procedure for H.225/Q.931 and H.245 Use fast-start procedure for H.225/Q.931Disable/enable h245 tunneling Disable/enable fax pass-through redundancyTftpURL, DHCP, VLANSetting, OpFlagsOpFlags Parameter Operational Features to Turn On or Off TimeZone Telephone Configuration Parameters 302Additional Description NTPIP, AltNTPIP,CallerIdMethod 316 Polarity0x00019e60 FXSInputLevel FXSOutputLevel304 To 2 dBRingOnOffTime, Tone Configuration ParametersTone Parameter Syntax-Basic Format Parameters and Defaults Tone Configuration Parameters Each tone is specified by 11 integers, as follows Tone Parameter Syntax-Extended FormatsExtended Format a Extended Format B Cadence With Two On-Off PairsCadence with Three On-Off Pairs Component Setting Explanation ReorderTone Parameter Example1ReorderTone Parameter Example Default values using the Basic format Recommended ValuesSpecific Tone Parameter Information DialToneBusyTone ReorderToneRingbackTone CallWaitTone922 923RingOnOffTime AlertToneDial Plan Parameters DialPlanRecommended Values DialPlan, DialPlanEx, IPDialPlan,Dial Plan Commands Dial Plan Commands, Dial Plan Rules, Dial Plan Examples,Dial Plan Rules Cisco ATA supports the following dial plan rulesSyntax Example‘P’ Rule to Support Dial Prefix Log Information Call Prefix prefix+num is shown in the prserv logThis rule is for blocking call numbers This rule blocks call numbers beginning with 1900 or‘X’ Rule for Call Blocking and Call Forwarding Blocking SCC CmdCLIP or CLIPnum are shown in the prserv logDial Plan Examples Following dial planDial Plan Example Following dial plansDiagnostic Parameters DialPlanExIPDialPlan 310NPrintf SyslogIPExtended IP address 0.0.514SyslogCtrl Bit Number Type of Messages to TraceCFGID-Version Parameter for Cisco ATA Configuration File OL-4804-01
Related manuals
Manual 228 pages 37.51 Kb Manual 208 pages 28.48 Kb Manual 166 pages 49.11 Kb Manual 48 pages 9.1 Kb Manual 208 pages 5.39 Kb Manual 14 pages 13.53 Kb

ATA 188, ATA 186 specifications

The Cisco Systems ATA 186, or Analog Telephone Adapter, revolutionized the way traditional telephony interacted with Voice over Internet Protocol (VoIP) systems. Designed primarily for home and small office use, the ATA 186 allows users to connect standard analog phones and fax machines to a network, enabling them to take advantage of the benefits of VoIP technology.

One of the defining features of the ATA 186 is its dual port architecture. It includes two FXS ports, allowing users to connect up to two analog telephones. This functionality means that multiple devices can leverage VoIP services simultaneously without the need for separate adapters for each phone. The flexibility of the ATA 186 helps streamline the user experience, facilitating voice communication over an IP network while ensuring users can still use their existing phone equipment.

The ATA 186 employs various technologies to maintain high-quality voice calls. It supports standard voice codecs such as G.711 and G.729, which ensure efficient bandwidth usage while preserving call clarity. The adaptive jitter buffer technology further enhances call quality, compensating for network variations and minimizing latency, which is crucial for clear and uninterrupted conversations.

Additionally, the ATA 186 provides users with advanced calling features that were traditionally available only on PBX systems. These features include caller ID, call waiting, and voicemail functionality, integrating seamlessly with typical telephony services. The device also supports T.38 fax relay, allowing users to send and receive faxes over the internet, thus addressing the needs of environments where fax communication remains essential.

The security of VoIP conversations is also a priority for the ATA 186. It employs encryption protocols such as Secure Real-time Transport Protocol (SRTP) and Transport Layer Security (TLS), ensuring that voice data is securely transmitted across the network. This focus on security helps protect sensitive information transmitted during calls.

Installation and configuration of the ATA 186 is streamlined, with an intuitive web-based interface that simplifies the setup process. This accessibility makes it suitable for users with varying levels of technical expertise, as frequently required adjustments, such as network configurations and firmware updates, can be easily managed.

In conclusion, the Cisco Systems ATA 186 stands out as a versatile and robust solution for users looking to integrate analog phones into a VoIP environment. With its dual port capabilities, high-quality voice codecs, advanced call features, and security measures, it offers a compelling choice for both residential and commercial users seeking seamless telephony integration. As technology evolves, devices like the ATA 186 remain cornerstones in bridging traditional telephony with modern communication systems.
Top Page Image Contents