Cisco Systems ATA 186, ATA 188 manual Dial Plan Parameters, DialPlan, Recommended Values

Chapter 5 Parameters and Defaults

Dial Plan Parameters

Recommended Values:

•United States —2,4,25

•Sweden — 1,5,25

Voice Configuration Menu Access Code

929

Dial Plan Parameters

This section describes the configurable parameters related to dial plans:

•DialPlan, page 5-52

•DialPlanEx, page 5-60

•IPDialPlan, page 5-60

DialPlan

Description

The programmable dial plan is designed for the service provider to customize the behavior of the Cisco ATA for collecting and sending dialed digits. The dial plan allows the Cisco ATA user to specify the events that trigger the sending of dialed digits. These events include the following:

•The termination character has been entered.

•The specified dial string pattern has been accumulated.

•The specified number of dialed digits has been accumulated.

•The specified inter-digit timer has expired.

Value Type

Alphanumeric string

Range

Maximum number of characters is 199.

Note If the dial plan exceeds 199 characters, use the DialPlanEx parameter instead of the DialPlan parameter. For more information, see the “DialPlanEx” section on page 5-60.

Default

*St4-#St4-9111>#t8.r9t2-0>#t811.rat4-^1t4>#.-

Voice Configuration Menu Access Code

926

Additional DialPlan Information

The DialPlan section contains the following additional topics that describe commands and rules for creating your own dial plan, and includes many examples:

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for H.323 (version 3.0)

5-52 OL-4804-01