Uniden UH-057 manual Recharging the Nickel-Cadmium Battery Pack, Belt Clip Installation

Recharging the Nickel-Cadmium Battery Pack

Note: Before charging, be sure that the power (ON/OFF Volume control) is turned OFF.

Recharge the Ni-Cd Battery ONL Y when the unit indicates a LOW BA TTERY condition.

(TX LED blinks during TRANSMIT)

Insert the discharged Battery Pack in the rapid charger, or connect the trickle charger to the side of the unit.

Using the trickle charger, the standard pack charges fully in 8 hours, and the heavy duty pack in 12 hours. If you have a rapid charger, the standard pack charges fully in 1.5 hours, and the heavy duty pack charges fully in 2 hours.

DO NOT leave the Batteries on charger for an extended period of time.

Belt Clip Installation

Place the Belt Clip on the mounting area on the back of the Radio, making sure the

holes in the clip line up with@ @ the threads in the back of the

Radio.

Insert the 2 screws into the corresponding holes and tighten.

BeltClip

-*II!nIIODEI.., 81'8' I0Il. 00III1BIWID8f 8AI1fRf

DC71ft 1liliiii tIlE

.-...-

DODO

CAUTION:

DO NOT tighten the screws too tight, you could damage the case.