Uniden UH-057 manual Cancel TSQ Scanning by pressing either the 0 or, Key

~

When a call is received while TSQ Scanning, UH-057 follows the same response as receiving a call on a Tone Squelch Channel. It differs only on the following.

1.If the call is not answered within the 20 second period, TSQ Scanning resumes. CAL indicator remains on the LCD.

To look for the channel where CALL is received:

UP

a. Cancel TSQ Scanning by pressing either the 0 or

DOWN

0 Key.

UP DOWN

b.Using the 0 or 0 Key, browse through the TSQ Channels.

The CAL indicator marks the channel where the call is received.

2.When answered, TSQ scanning is automatically deactivated. The channel is removed from the Quiet

Operating Mode.

To deactivate TSQ Scanning:

UP DOWN

1.Press either the 0 or 0 Key. SCN indicator disap- pears from the LCD and the unit returns to the Ch.annel

prior to accessing TSQ Scanning.

2.When a SELCALL is received, press the PIT Switch.

Note: The chance of receiving and decoding Selcall Call effectively while TSQ Scanning can be increased in many different ways. You can either lessen the number of channels to be scanned to increase the scanning speed, or change some of the SELCALL Parameters (please see "Other parameters" on page

30). BE SURE THAT EVERY MEMBER OF YOUR GROUP USES THE SAME SET-UP. OTHERWISE, YOU WILL LESSEN THE CHANCE OF SELEC- TIVEL Y CALLING EACH OTHER.

UH-O57 Page 24