Channel Scan
UP
When you pressed the 0 Key for more than 1.5 seconds,
the scan feature starts and the SCN indicator appears on the LCD.
Scanning stops automatically on any active channel that is not
UP
To resume scanning, press the 0 Key.
If there is too much activity on a certain channel and you
wish to exclude it from being scanned, simply press the uo
0 Key (please see page 18 on how to create a channel scan list).
To disable scanning:
DOWN
- when on an active channel, press the 0 Key and
the unit stays on the active channel.
UP DOWN
-while scanning, press the 0 or 0 Key. The unit returns to the channel where scan function is acti- vated.
-press the PIT switch. When the unit is on an active channel, it transmits on the same channel.
When scanning, the unit transmits on the channel where scan function is activated.
SCN indicator disappears from the LCD Display.
Drop Out Delay
While scanning, the radio stops at a busy channel and receives a transmission. When the received call is over, the unit will wait for three seconds for the return of the signal. Otherwise it resumes scanning.
| Page 16 |